1)  Speed select is displayed in two forms: a) 100-399 knots in increments of 1 knot. b) GUN 051-099;
 0.400-0.950 Mach in increments of 0.010 Mach. c) GUN 001-050, 101-999; 0.400-0.950 Mach in increments of 0.001 Mach.
AIRSPEED/MACH 
AUTOTHROTTLE  CONTROL KNOB AND 
ARM SWITCH  LOCAL/REMOTE 

SELECT AIRSPEED/MACH SWITCH/LIGHT
SELECTOR SWITCH EPR OR THR AS INSTALLED
Mode Control Panel - Autothrottle Functions Figure 6

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú
 ú  14  Page 12
 ú  Jan 28/02 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 2)  An airspeed/Mach selector (SEL) switch transfers the speed display between airspeed and Mach. Airplane Mach must be at least 0.40 before transfer to the Mach display can be accomplished. Rotating the IAS/MACH control knob adjusts the speed/Mach display during local command. Pushing the knob transfers control of the speed reference bug on the MASI between the MCP and FMC. The speed/Mach display is blank when control is from the FMC.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 31 Page 13 ú Sep 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

(3)

(4)

757
MAINTENANCE MANUAL

Electronic Attitude Director Indicator (EADI) - Autothrottle Displays (Fig. 7)
 (a)  
Two types of status modes are displayed on the EADI: 1) A/T for autothrottle displayed. 2) F/S for autothrottle off, no autopilot speed control, and

 F/S reflecting a limit rather than airspeed bug.

 (b)  
Two types of autothrottle modes are displayed on the EADI: 1) EPR, IAS, MACH, FL CH, GA, IDLE, TEST, THR HOLD for

 operating modes. 2) FLAP LIM, ALPHA, IAS LIM, MACH LIM for limit modes

 (c)  
A fast/slow display on the left side of the EADI indicates speed performance to the crew. The display is active when within 10 knots of the reference airspeed.

EICAS Display Unit - Autothrottle Functions (Fig. 8)

 (a)  
The upper EICAS display unit provides the primary engine parameters and TMC computed data required to set and monitor thrusts. These parameters are displayed continuously in both analog type round dial and digital readout for the left and right engines.

SPEED DEVIATION POINTER

FAST/SLOW
ANNUNCIATION

AUTOTHROTTLE MODES
ENGAGED
EPR
SPD
FLCH
GA
IDLE

STATUS
TEST
A/T
THR-HOLD
F/SLIMIT FLAP LIM (EXAMPLE DISPLAY FORMAT) ALPHA SPD LIM
EADI - Autothrottle Displays
Figure 7

D01585
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 10 Page 14 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

MAXIMUM THRUST LIMIT MARKER (AMBER)
REFERENCE/TARGET THRUST BUG

COMMANDED
THRUST LEVEL

COMMAND
SECTOR

REFERENCE/TARGET
THRUST READOUT

TOTAL AIR

SELECTED
TEMPERATURE
TEMPERATURE
READOUT
READOUT

REFERENCE THRUST LIMIT MODE
ACTUAL THRUST LEVEL READOUT
ACTUAL THRUST LEVEL POINTER
PRIMARY THRUST PARAMETER READOUT

UPPER EICAS DISPLAY UNIT

DISPLAY  COMPUTER  BRT  THRUST REF SET 
BRT 
ENGINE STATUS  EVENT  AUTO  BAL  MAX INDBOTH 

 RECORD  RL 
 RESET PULL RL 

EICAS CONTROL PANEL (EXAMPLE)
EICAS Display - Autothrottle Functions
Figure 8

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 2(117)