(e)
Remove the DO-NOT-CLOSE tag and close these circuit breakers on the overhead circuit breaker panel, P11: 1) 11A21, PASSENGER OXYGEN LEFT 2) 11A23, PASSENGER OXYGEN RIGHT 3) Make sure the light in the ON switch comes on.
(f)
Push the SYST PWR switch on the SCU to off and then on. 1) Make sure the SCU comes on.
N. GUN 102-999; VTR Random Access Functional Test
S 735-010
(1) Do these steps to do a test of the random access function:
(a)
Push the EJECT button on the VTR-1.
(b)
Remove the video test tape.
(c)
Put a video cassette tape into the VTR-1 that is random access encoded.
(d)
Touch the MENU button on the SCU.
(e)
Touch ZONE A and ZONE B on the SCU.
(f)
Touch VIDEO 1 on the SCU.
(g)
Press the PREV switch on the SCU.
(h)
Touch VIDEO 1 on the SCU.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH VIDEO ENTERTAINMENT ú
23-32-00
ú ú 04 Page 509 ú Dec 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
(i)
Touch CONT on the SCU.
(j)
Touch 0 and 3 on the SCU.
(k)
Touch CONT on the SCU.
(l)
Touch PA on the SCU.
(m)
Touch NEXT ENTRY on the SCU.
(n)
Touch 0 and 2 on the SCU.
(o)
Touch CONT on the SCU.
(p)
Touch END on the SCU.
(q)
Touch CONT on the SCU.
(r)
Touch EXEC on the SCU.
NOTE: Wait until 3PA turns green and flashes.
____
1) Make sure the video monitors show video segment 3.
(s)
Turn the PA control knob on the SCU to an agreeable level. 1) Make sure you can hear video audio on all the PSU speakers.
(t)
Touch EXEC on the SCU.
NOTE: Wait until the video segment 2 is green.
____
1) Make sure the video monitors show video segment 2. 2) Make sure you can hear video audio on the PSU speakers.
(u)
Touch MENU on the SCU.
(v)
Push the EJECT switch on VTR.
(w)
Remove the video test tape from the VTR.
(x)
Push the SYST PWR switch to off at the SCU.
S 735-020
(2) Do the steps again with VTR-2 (if installed) to do a test of the random access function for VTR-2.
(a) Make sure the same results occur.
O. GUN 102-999; VTR Operation Test
S 735-018
(1) Do the steps that follow to do a test of the VTR operation:
(a)
Push the SYST PWR switch on at the SCU.
(b)
Put a tape cassette into VTR-1.
(c)
Touch CONT on the SCU.
(d)
Touch each airplane zone on the SCU display.
(e)
Touch VIDEO 1 on the SCU.
(f)
Push the PREV switch on the SCU.
(g)
Touch VIDEO 1 on the SCU.
(h)
Touch and hold FF (fast forward) on the SCU. 1) Make sure the FF switch-light on VTR-1 comes on.
(i)
Release FF on the SCU.
(j)
Touch and hold REW (rewind) on the SCU. 1) Make sure the REW switch-light on VTR-1 comes on.
(k)
Release REW on the SCU.
(l)
Touch STOP on the SCU. 1) Make sure the STOP switch-light VTR-1 comes on.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH VIDEO ENTERTAINMENT ú
23-32-00
ú ú 02 Page 510 ú Dec 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(m)
Push the PREV switch on the SCU.
(n)
Touch VIDEO 2 on the SCU.
(o)
Touch and hold the FF switch on the SCU. 1) Make sure the FF switch-light on VTR-2 comes on.
(p) 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：757 AMM 飛機維護手冊 COMMUNICATIONS 通訊(66)
