曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (d)  Apply the solution with a cloth, mop, brush, or sponge. 1) Make sure the solution goes into the contaminated faying surface joints.
 NOTE:____ A pressure application of the solution can be necessary to flush the faying surface joints and some access areas fully.
 (e)  Apply the solution until bubbles cease in the acid/solution.
 NOTE:____ When the bubbles cease, the acid has become neutral.
 (f) (g) (h) (i)  Then allow the solution to remain on the surface for an additional 5 minutes after the bubbles stop.Remove the solution with mop or sponge.Flush the area with large quantities of clean water. 1) Rub the surface with a soft brush.Do a test of the cleaned area with litmus paper.
 NOTE:____ The litmus paper should read between 7 and 8 when the area is fully cleaned.
 (j) (k) (l)  Wipe dry with clean cloths.After thoroughly dry, repair or replace damaged finishes if it is necessary. Refer to CPM 20-50-00 and CPM 20-60-00 for protective finish systems.Apply water displacing corrosion preventive compound BMS 3-23, over entire area.
 NOTE:____ For details of application of BMS 3-23 refer to CPM 20-60-00.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 05-51-57
 ALL  ú ú 01 Page 203 ú Jan 20/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.

 

　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 時間限制/維護檢查(62)