(10.2-11.3 newton meters).

 (e)  
Tighten the bolts (1) to 36-40 pound-inches
 (4.1-4.5 newton-meters).

 S 414-026-N00
 CAUTION: MAKE SURE THE WIRE HARNESS DOES NOT TWIST OR BADLY BEND DURING
_______ THE REMOVAL OR THE INSTALLATION. THIS CAN CAUSE DAMAGE TO THE WIRE HARNESS.
 (5)  
Install the fasteners that attach the wire bundle clamps to the brackets at Flange A1 and Flange B on the left side of the engine as follows:

 (a)  
Put the wire bundle forward.

 (b)  
Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (27).

 NOTE: This bracket (27) is at the 11:30 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches (2.8-4.0 newton-meters).
 (c)  Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (27).
 NOTE: This bracket (27) is at the 11:45 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches (2.8-4.0 newton-meters).
 (d)  Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (15).
 NOTE: This bracket (15) is at the 11:30 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches (2.8-4.0 newton-meters).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-01
 ALL  ú ú N02 Page 419 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 414-027-N00
 CAUTION: MAKE SURE THE WIRE HARNESS DOES NOT TWIST OR BADLY BEND DURING
_______ THE REMOVAL OR THE INSTALLATION. THIS CAN CAUSE DAMAGE TO THE WIRE HARNESS.
 (6)  
Install the fasteners that attaches the wire bundle clamps to the brackets at Flange A1, B, and Flange B1 on the right side of the engine as follows:

 (a)  
Put the wire bundles forward.

 (b)  
Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (27).

 NOTE: This bracket (27) is at the 12:00 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches (2.8-4.0 newton-meters).
 (c)  Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (27).
 NOTE: This bracket (27) is at the 1:00 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches
 (2.8-4.0 newton-meters).

 (d)  Install the screw (4), threads lubricated with engine oil, washer (5), and nut (6) that attaches the wire bundle clamp to the bracket (32).
 NOTE: This bracket (32) is at the 1:30 o'clock position.
____
 1)  Tighten the screw (4) to 25-35 pound-inches
 (2.8-4.0 newton-meters).

 (e)  Install the bolts (1), threads lubricated with engine oil, and nuts (2) that attaches the wire bundle clamps to the Flange B1 bracket.
 NOTE: This Flange B1 bracket is at the 1:30 o'clock position.
____
 1)  Tighten the bolts (1) to 35-40 pound-inches
 (4.1-4.5 newton-meters).

 (f)  Install the bolt (1), threads lubricated with engine oil, and nut (2) that attaches the wire bundle clamps to the bracket (13).
 NOTE: This bracket (13) is at the 2:30 o'clock position.
____
 1)  Tighten the bolt (1) to 35-40 pound-inches
 (4.1-4.5 newton-meters).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 72-33-01
 ALL  ú ú N02 Page 420 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(g)  Install the bolt (1), threads lubricated with engine oil, and nut (2) that attaches the wire bundle clamps to the split bracket (10).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 發動機 ENGINE 2(5)