(b)  
Make sure 1 shows for bit position 24.

 (c)  
Set the FMC master switch in the L position.

 (d)  
Make sure 0 shows for bit position 24.

 S 865-181
 (12) Prepare the INPUT MONITORING page to monitor E/46/274/00:
 NOTE: Label 274 monitors these inputs:
____ -Air/Ground status (1=ground)
 -A/T Disconnect (1=disconnect)
 -Go Around status (1=G/A)
 (a) Push E/46/274/00 on the scratchpad for the center CDU.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-61-00
 ALL  ú ú 28 Page 531 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (b)  Push the necessary LSK to show E/46/274/00 below the PORT LBL SDI indication. 1) Make sure SAMPLE intermittently shows below E/46/274/00.
 S 735-182
 (13) Do the input check for label 274:
 (a)  
Open this circuit breaker:

 1)  P7 Overhead Circuit Breaker Panel a) 7F23 LANDING GEAR DSP & CONT ALTN

 (b)  
Make sure 0 shows for bit poition 26.

 (c)  
Close this circuit breaker:

 1)  P7 Overhead Circuit Breaker Panel a) 7F23 LANDING GEAR DSP & CONT ALTN

 (d)  
Make sure 1 shows for bit position 26.

 (e)  
Push and hold the TO/GA switches.

 NOTE: The TO/GA switches are on the two inner throttle levers.
____
 (f)  
Make sure 1 shows for bit position 27.

 (g)  
Release the TO/GA switches.

 (h)  
Make sure 0 shows for bit position 27.

 (i)  
Push and hold the captain's A/T disconnect switch.

 NOTE: The captain's A/T disconnect switch is on the left
____
 throttle lever.

 (j)  
Make sure 1 shows for bit position 28.

 (k)  
Release the captain's A/T disconnect switch.

 (l)  
Make sure 0 shows for bit position 28.

 S 865-183
 (14) Prepare the INPUT MONITORING page to monitor E/46/160/00:
 NOTE: Label 160 monitors these inputs:
____ -NAV source select switch
 -ADC source select switch
 -HDG reference select switch (1=NORM, 0=TRUE)
 (a)  Push E/46/160/00 on the scratchpad for the center CDU.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 34-61-00
 ALL  ú ú 27 Page 532 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (b)  Push the necessary LSK to show E/46/160/00 below the PORT LBL SDI indication. 1) Make sure SAMPLE intermittently shows below E/46/160/00.
 S 735-184
 (15) Do the input check for label 160:
 (a)  
Make sure 0 shows for bit position 24.

 (b)  
Set the HDG select switch to the TRUE position.

 NOTE: The HDG select switch is on the P2 pilot's center
____
 instrument panel.

 (c)  
Make sure 0 shows for bit position 25.

 (d)  
Set the HDG select switch to the NORM position.

 (e)  
Make sure 1 shows for bit position 25.

 (f)  
Set the captain's ADC select switch to the R position.

 NOTE: The captain's ADC select switch is on the P1 captain's
____
 main instrument panel.

 (g)  
Make sure 0 shows for bit position 23.

 (h)  
Set the captain's ADC select switch to the C position.

 (i)  
Make sure 1 shows for bit position 23.

 (j)  
Set the captain's ADC select switch to the L position.

 (k)  
Make sure 1 shows for bit position 23.

 (l)  
Set the first officer's ADC select switch to the L position.

 NOTE: The firt officer's ADC select switch is on the P3 first
____
 officer's main instrument panel.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 導航 NAVIGATION 3(181)