(12)
E00119 Stripper - Cee Bee A-306B
(13)
E00120 Stripper - Cee Bee R256A
(14)
E00041 Resin - Organic Fiber, ES-1
(15)
E00122 Pennwalt EZ Strip 19E
(16)
B00280 Stripper - Brush-on Organic Paint, Turco 5292B
(17)
E00002 Stripper - Paint, Turco 5351-Thick
(18)
E00002 Stripper - Paint, Turco 5351-Thin
(19)
E00125 Stripper, Turco 5873
(20)
B00082 Solvent - Ethulene Glycol Monobutyl
Ether (Butyl Cellosolve),
TT-E-776
(21)
B00068 Solvent - Ethyl Alcohol, Denatured,
O-E-760, Grade III or IV
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-11
ALL ú ú B02 Page 701 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(22)
B00148 Solvent - Methyl Ethyl Ketone (MEK), TT-M-261
(23)
B00153 Solvent - Toluene, TT-T-548
(24)
B00154 Solvent - Toluene, JAN-T-171
(25)
E00050 Stripper - Turco 800, Turco Products, Inc.
(26)
E00048 Organic Xylene (Xylol), TT-X-916, Grade A or B
(27)
B00192 Solvent, BMS 3-2, Type I
(28)
B00722 Solvent, P-D-680, Type I
C. Prepare for Paint Stripping
S 957-005-B00
CAUTION: DO NOT LET THE PAINT STRIPPERS TOUCH THE TEFLON LINED
_______ SELF-LUBRICATED BEARINGS, ELECTRICAL TERMINAL PLUGS, NYLON-COATED WIRES, AND NYLON BUSHINGS. CHEMICALS IN THESE MATERIALS WILL CAUSE DAMAGE TO THE COMPONENTS.
(1) Apply tape or covers to areas which can be damaged easily by the paint strippers.
(a)
Put the applicable tape or covers on lubricated parts, rubber parts, laminated plastics, fiberglass, aerodynamic smoother and metal bonded edges.
(b)
Apply tape a minimum of one-inch wide on the skin to all access doors, fairings, wing leading edges and trailing edges.
(c)
Apply tape on the drain holes and vents.
S 157-012-B00
(2)
Make sure that you fully mix the components in the paint stripper mixture before you use it.
S 157-013-B00
(3)
Shake the paint strippers immediately before you apply or after you add the paint stripper materials.
S 117-002-B00
(4)
Clean the area with BMS 3-2, Type I or P-D-680, Type I solvents.
(a) Carefully remove loose soil, grease, or oil.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
51-21-11
ALL ú ú B02 Page 702 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b) Clean the surface with a wet cheesecloth, soft brush or sponge that is moist with solvent.
NOTE: A spray gun can help you clean the surface.
____
(c)
Flush the surface with clean solvent.
(d)
Rub the surface with a clean cheesecloth.
(e)
Remove all unwanted solvent.
(f)
Let the surface dry.
S 117-003-B00
CAUTION: MAKE SURE THAT YOU FULLY CLEAN THE SURFACE BEFORE YOU APPLY THE
_______ PAINT OR ADHESIVE. USE ONLY BMS 3-2, TYPE I SOLVENT TO CLEAN THE SURFACE. DO NOT USE P-D-680 OR DAMAGE TO THE SURFACE CAN OCCUR.
(5) Clean the area again with BMS 3-2, Type I only.
(a)
Use a squirt bottle to apply the solvent on the surface.
(b)
Clean the surface with a clean cheesecloth until you remove all large pieces of soil.
(c)
For areas which are not easy to clean, use a soft bristle brush to clean the surface.
(d)
Clean the surface again with a new cheesecloth until you can see no signs of soil on the cheesecloth.
NOTE: It will be necessary to change the cheesecloth
____ frequently when you clean the surface.
(e)
Dry the area with a clean cheesecloth.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 結構 STRUCTURES(12)
