曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 ú  1) Remove the outboard flap (AMM 27-51-34/401).
 ú  2) Remove and replace the fractured carriage.
 ú  3) Install the outboard flap (AMM 27-51-34/401).
 ú  (b) If you don not find spindle fractures, do this step:
 ú  1) Do the Flight Controls Trim Correction - Trouble Shooting
 ú  (AMM 27-09-71/101) for trouble shooting of unexpected
 ú  aileeron and/or rudder inputs.
 ú
 ú  S 752-007
 ú  (2) Manual Inspection (Alternate)
 ú  (a) Manual lift the main flap box at each end separetely to detect
 ú  any differential movement between the main flap box and the
 ú  flap carriage.
 ú 
        ú
 NOTE: Any differential motion between the flap box and the____
 ú  carriage is an indication of a fracture of forward
 ú  portion of the spindle. Use the opposite flap as a
 ú  basis of comparison to detect any abnormal differential
 ú  movement between the flap box and the carriage.
 ú  1) If a fracture is detected in one of the carriage spindles,
 ú  do these steps:
 ú  a) Remove the flap (AMM 27-51-34/401).
 ú  b) Remove and replace the fractured carriage.
 ú  c) Install the flap (AMM 27-51-34/401).
 ú  (b) If you do not find spindle fractures, do this step:
 ú  1) Do the Flight Controls Trim Correction - Trouble Shooting
 ú  (AMM 27-09-71/101) for trouble shooting of the unexpected
 ú  aileron and/or rudder inputs.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 05-51-75
 ALL  ú ú 01.1 Page 202 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 CONDITIONED AIR PACK OUTLET DUCT SYSTEM FAILURE - MAINTENANCE PRACTICES
_______________________________________________________________________
 1.  General
_______
 A.  This procedure contains the task to examine the applicable valves after an upstream duct failure.
 (1)  
The two cold air check valves are installed in the distribution bay just upstream of the mix muff.

 (2)  
The hot air check valves are installed in each of the air-conditioning bays.

 (3)  
These valves can be damaged when there is an upstream duct failure of the pack outlet.

 (4)  
When there is a duct failure, the applicable valve must be removed and inspected.

 TASK 05-51-80-212-001
 2.  Cabin Air Check Valve Conditional Inspection
____________________________________________
 A.  References
 (1)  
AMM 21-21-04/401, Cold Air Check Valve

 (2)  
AMM 21-51-04/401, Hot Air Check Valve

 B.  Access
 (1)  
Location Zone (AMM 12-31-01/201)
 210 Air-Conditioning Distribution Bay

 (2)  
Location Zones (AMM 12-31-01/201)
 212 Left Air-Conditioning Equipment Bay
 214 Right Air-Conditioning Equipment Bay

 

 C.  Procedure
 S 022-002
 (1)  
Remove the applicable check valve for inspection
 (AMM 21-21-04/401, AMM 21-51-04/401).

 (2)  
Do a visual inspection of the applicable check valve

 S 212-003
 NOTE: If there is damage to the valve, the valve must be
____
 replaced.

 (a)  Look for:
 -missing parts
 -cracks
 -corrosion
 -flapper deformation
 -restricted flapper movement.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 05-51-80
 ALL  ú ú 03 Page 201 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 TIME LIMITS/MAINTENANCE CHE(79)