曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

C.  The heading cursor, which is ganged to the rotor of the heading select synchro, indicates the selected magnetic heading, and is positioned by the HEADING knob on the flight director control panel. Once set, the heading cursor rotates with the compass card, giving a continuous display of selected heading, and any heading deviation. Heading information is used in computing bank steering commands when the flight director system is in heading or HDG V/L mode.
D.  The central portion of the indicator is the deviation section. It contains the course arrow, course deviation bar, course deviation scale and TO-FROM arrows. The entire section rotates with the compass card as the heading of the airplane changes. The various components of the section perform their individual functions as follows:
(1)  
The course arrow points in the direction of the selected course, and is positioned by the COURSE knob on the flight director mode selector panel.

(2)  
The course deviation bar indicates the deviation from the selected course. With the airplane on course, the course deviation bar is aligned with the course arrow and tail. Either the VOR/ILS or omega navigation unit controls the course deviation bar depending upon the NAV transfer switch position.

(3)  
The to-from pointer appears from behind the course mask pointing to the head of the course arrow to indicate the airplane is flying to a VOR station or omega waypoint. The pointer appears in the opposite direction pointing to the tail of the course arrow to indicate the airplane is flying from a VOR station or omega waypoint. The to-from arrow is out of view behind the course mask when the VOR/ILS navigation system is tuned to an ILS frequency.

5C8 
34-26-0 Page 6  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  Feb 20/86 

 

E.  The miniature airplane in the center of the indicator simulates the position of the real airplane in flight. It is compared against heading cursor, course arrow and course deviation bar positions, to obtain the pictorial representation of the airplane heading, and any deviation from the desired heading or course.
F.  The VOR/LOC flag functions to indicate navigation unit; VOR or omega malfunction. It appears whenever power is turned off, or lost to the navigation unit, or whenever the course deviation signal fails, or falls below a certain predetermined value. The GS warning flag functions in a similar manner, but with respect to the GS receiver.
G.  The GS pointer displays airplane position relative to the glide slope. It is read against the GS scale to indicate position of the airplane with respect to the glide slope. A deflection up indicates that the airplane is below the glide slope, and a deflection down that it is above the glide slope. The pointer is actuated by the GS deviation signal. The glide slope flag and pointer are biased out of view when the associated NAV transfer switch is in the OMEGA position or when the VOR/ILS navigation system is tuned to a VOR frequency.
H.  Two counters at the top of the HSI indicate the airplane ground speed and miles to go to the selected omega way point (Ref 34-59-0).
I.  A VOR-ILS flag appears in the VOR-ILS/NAV annunciator when the VOR/ILS navigation system is selected by the NAV transfer switch as the source of navigation information. With the NAV transfer switch in OMEGA position, the VOR-ILS flag retracts to reveal a NAV legend.
J.  A navigation system number annunciator displays either the numeral 1 or 2 to indicate whether navigation unit No. 1 or 2 is being used as the navigation data source for the HSI. The HSI system number annunciator displays the numeral 1 when the associated NAV transfer switch is in the OMEGA position.
5C8 
Feb 20/86  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  34-26-0 Page 7 

 

K.  A heading information annunciator appears behind the lubber line at all times. The HEADING flag will appear anytime the compass system data is invalid. 
L.  The ALERT annunciator, located in the lower left portion of the instrument face, is not used.
4.  Flight Director Control Panel (Mode Selector Panel)
A.  The flight director control panel, located on the lightshield, contains the mode selector switch, altitude hold switch, manual pitch command knob, two course selector controls with associated digital readouts and a heading select knob with associated digital readout.
B.  The mode selector switch, common to both systems, enables the selection of the following flight director computer operating modes: GA, OFF, HDG, VOR/LOC, AUTO APP, HDG V/L, HDG-GA and MAN GS.
(1)  
The GA (go-around) mode can be selected by turning the mode switch directly to the GA position or by automatic selection. Automatic selection can only be accomplished when the mode selector switch is in the AUTO APP or MAN GS position and only if glide slope capture has occurred. When these conditions are met, the GA mode can be selected by pressing either of the go-around switches on the thrust reversers. This causes the mode switch to automatically return to the GA position. The GA light will come on green in the F/D annunciator anytime the GA mode is selected.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機維護手冊 導航 NAVIGATION 1(90)