(f)  
Place NAV mode select switch in AUTO/APP position and select a VOR frequency. Observe that NAV mode select switch returns to MAN position and cannot be rotated to AUTO/APP position.

(g)  
Select an ILS frequency and place NAV select switch in AUTO/APP position.

(h)  
Place pitch mode select switch (on autopilot control panel) in TURB position. Observe that NAV mode select switch returns to MAN position and cannot be rotated to AUTO/APP position.

(i)  
Return pitch mode select switch to OFF position.

(j)  
Place NAV mode select switch in AUTO/APP position.

(k)  
On airplanes with CADC, place selector switch (on face of No. 1 computer) in ALT MON position. Press toggle switch to MON for approximately 2 seconds and observe that the autopilot disengages.

(l)  
On airplanes with DADC, place selector switch (on face of No. 1 computer) in FAIL position. Depress PUSH TO TEST button for approximately 2 seconds and observe that the autopilot disengages.

(m)  
Return computer selector switch to normal operating position.

(n)  
On GJ B-2511 and on, select an ILS frequency and place NAV mode select switch in AUTO/APP position. Place the captain HSI switch to OMEGA position. Observe that NAV mode select switch returns to MAN position, and cannot be rotated to AUTO/APP position.

(o)  
Return captain HSI switch to RADIO position.

(5)  
Deleted.

(6)  
Test HDG OFF and HDG SEL and NAV Mode Control

5C8 
Oct 20/85  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  22-11-0 Page 511 

NOTE:  This test assumes zero VOR deviation signal and valid NAV superflag and operating OMEGA system.
(a)  
Apply a VOR frequency and engage AIL engage switch.

(b)  
Engage HDG SEL switch. Check that approach progress display (APD) HDG SEL illuminates green.

(c)  
Disengage AIL engage switch. Observe that HDG SEL switch disengages.

(d)  
Engage AIL engage switch and engage HDG SEL switch.

(e)  
Place mode select switch in VOR/LOC position. Observe that HDG SEL switch disengages. Return mode select switch to MAN.

(f)  
Engage HDG SEL switch.

(g)  
Turn either control wheel out of detent. Observe that HDG SEL switch disengages and that HDG SEL mode cannot be selected.

(h) 
 Disengage autopilot.

(i)  
Engage AIL engage switch. Place mode select switch in HDG OFF position and then disengage AIL engage switch. Observe that mode select switch returns to MAN position.

(j)  
Engage AIL engage switch. Place mode select switch in HDG OFF position, and select NAV. Observe that mode select switch returns to MAN position and that HDG OFF mode cannot be selected.

(k)  
Return the heading select switch to the OFF position.

(l)  
Engage AIL engage switch and place mode select switch in HDG OFF position. Engage HDG SEL switch. Observe mode select switch returns to MAN position and that HDG OFF mode cannot be selected. Disengage HDG SEL switch.

(m)
Engage AIL engage switch and place mode select switch in HDG OFF position. Observe that rotating the control wheel out of detent requires 1.5 to 2.8 pound-feet of torque.

NOTE:  Torque valves in excess of 2.8 pounds-feet may indicate an incorrectly installed aileron force limiter.

(n) 
 Disengage autopilot.

5A8 22-11-0 Oct 20/84
Page 512
BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.

(o)  
Engage AIL engage switch.

(p)  
Select and engage NAV mode. Observe that the NAV light on APD illuminates green.

(q)  
Disengage AIL engage switch. Observe that the NAV toggle switch returns to its center position.

(r)  
Engage AIL engage switch. Select and engage NAV mode.

(s)  
Place the mode select switch to VOR/LOC position. Observe that the NAV switch returns to its center position. Return the mode select switch to MAN position.

(t)  
Select and engage NAV mode. Turn the control wheel out of detent. Observe that the NAV switch returns to its center position and that it is not possible to select NAV mode while the control wheel is out of detent.

5A7 
Oct 20/84  BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details.  22-11-0 Page 513 

(7)  
Test ALT HOLD Mode Control

(a) 
 Engage autopilot.

(b)  
Place pitch mode select switch in ALT HOLD position.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737 AMM 飛機維護手冊 AUTO FLIGHT 自動飛行 1(45)