20-25-11 Page 12
___________________________________________
STRIPPING TOOLS - DESCRIPTION AND OPERATION
_______1. General
This topic gives the description of stripping tools.
Miscellaneous processes can be applied and miscellaneous tools can be used,
including :
-manual tools (mechanical pliers, scalpels or cutters),
-semi-automatic tools,
-"special" tools.
_______
CAUTION : MAKE SURE THAT YOU DO NOT CUT THE BRAIDED SHIELD OR CAUSE DAMAGE TO THE CENTER CONDUCTOR WHEN YOU STRIP THE CABLE.
_______
CAUTION : DO NOT USE TOOLS THAT HAVE V-SHAPED OR SHEAR-TYPE KNIVES. THIS TYPE OF KNIFE CAN CAUSE DAMAGE TO CABLES.
___________________________________
2. Scalpels, cutter or equivalent tool (Ref. Fig. 001)
_______
WARNING : BE VERY CAREFUL WHEN YOU USE THESE TOOLS. THEY ARE SHARP AND CAN CUT YOU.
____
NOTE : During the stripping operation, the cable must be held at right angles to the blades and the insulation must be removed parallel to the cable axis.
A. Conditions of application
Manual insulation stripping with cutting tools is allowed for :
-cables of cross sections above 5 mm2 or wire gauge 10,
-fire resistant cable insulation,
-screened cables (braided screening or helical screening),
-coaxial cables.
20-25-12 Page 1
Oct 01/04
R
Stripping tools - Scalpels, Cutter or equivalent tool
Figure 001
20-25-12 Page 220-25-12 Page 3
_________________3. Stripmaster tools
(Ref. Fig. 002)
There are several types of STRIPMASTER manual stripping pliers.
R Each type of pliers has an engraved reference number.
Each type of pliers includes several apertures which match a cable size.
____NOTE : When a change of the stripping dies is necessary, always change the
two parts. After changing the dies, samples must be made and checked.
A. Example of stripping tools
-----------------------------------------------------------------------------
R | IDEAL-STRIPMASTER |STRIPPING DIES| COLOR | CABLE |ADMISSIBLE WIRES |
| | | OF | CLAMPING |---------|-------|
| Tool P/N | P/N |HANDLES| JAWS SET P/N | SIZES | TYPE |
|-------------------|--------------|-------|--------------|---------|-------|
| 45-2020 * | 45-2020-1 | Blue | LB-722 | | |
R |-------------------|--------------|-------|--------------| | |
R | 45-1952 * | 45-1952-1 | Blue | LB-722 | | |
R |-------------------|--------------|-------|--------------|26 to 16 | |
R | TMC-PCW1 ** | TMCW1 | Black | LB-722 | | |
R |-------------------|--------------|-------|--------------| | |
R | TMC-PCW3 ** | TMCW3 | Green | TMC-MP3 | | |
R |-------------------|--------------|-------|--------------|---------| |
| 45-1773 | 45-1773-1 | Red | LB-198 |24 to 16 |METRIC |
|-------------------|--------------|-------|--------------|---------| |
| 45-1774 | 45-1774-1 | Black | LB-197 |14 and 12| |
|-------------------|--------------|-------|--------------|---------| |
R | 45-1939 | 45-1939-1 | Red | LB-721 | | |
R |-------------------|--------------|-------|--------------| | |
R | TMC-PCW2 ** | TMCW2 | Grey | LB-721 |14 to 10 | |
R |-------------------|--------------|-------|--------------| | |
R | TMC-PCW4 ** | TMCW4 | Green | TMC-MP4 | | |
R |-------------------|--------------|-------|--------------|---------|-------|
| 45-092 | L-4421 | Blue | LB-198 |22 to 16 | |
|-------------------|--------------|-------|--------------|---------| |
| | L-5211 | | | | |
| 45-171 | or | Blue | LB-198 |26 to 16 | US |
| | 45-1654-1 | | | | |
|-------------------|--------------|-------|--------------|---------| |
| | 45-1608-1 | | | | |
| 45-170 | or | Red | LB-197 |14 to 10 | |
| | L-5210 | | | | |
-----------------------------------------------------------------------------
* the difference between these 2 stripping pliers is the position of the wire
gauge cavities on the stripping dies.
R ** DAVUM - STRIPMASTER
R Stripping Tools - STRIPMASTER Tool or Equivalent Figure 002
20-25-12 Page 4
B. Content of jaws set ---------------------------------------------------------| JAWS | MOVABLE | FIXED | CHARACTERISTICS | | SET P/N | JAW P/N | JAW P/N | | |-----------|-----------|-----------|-------------------| | LB-721 | LB-718 | LB-719 |specific for hard- | |-----------|-----------|-----------|to-grip Surfaces | | LB-722 | LB-718 | LB-720 |(eg Kapton, Teflon)| |-----------|-----------|-----------|-------------------| | LB-197 | L-5212 | L-5217 |standard for all | |-----------|-----------|-----------|products | | LB-198 | L-5212 | L-5215 | | --------------------------------------------------------- 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 1(87)
