Corrected PT (Table A) = (PT x (1.0132/Barometer)) + PT(CORR) (Table A Value = (AIDS Value x (1.0132/Barometer(bar)) + Value T4)
 NOTE : For the Value T4 ==>
____ (Ref. Fig. 504/TASK 49-00-00-991-004)
 (d) MES Mode EGTA and PT Correction Formula EGTA(Table A) = EGTA + EGT(GLA) + EGT(LCIT) - EGT(IGV) (Table A Value = ECAM Value + Value T2 + Value T5 - Value T8)
 NOTE : For the Value T2 ==>
____ (Ref. Fig. 502/TASK 49-00-00-991-002) For the Value T5 ==> (Ref. Fig. 505/TASK 49-00-00-991-005) For the Value T8 ==> (Ref. Fig. 508/TASK 49-00-00-991-011)
 (Corrected PT (Table A) = (PT x (1.0132/Barometer)) + PT(CORR) - PT(IGV) (Table A Value = (AIDS Value x (1.0132/Barometer(bar)) + Value T5 - Value T8)
 NOTE : For the Value T5 ==>
____ (Ref. Fig. 505/TASK 49-00-00-991-005) For the Value T8 ==> (Ref. Fig. 508/TASK 49-00-00-991-011)
 5. Close-up
________
 Subtask 49-00-00-860-084
 A. Put the aircraft back to its initial configuration.
 (1)
 Do the EIS stop procedure
 (Ref. TASK 31-60-00-860-002).

 (2)
 De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002).

 TASK 49-00-00-790-001
 Check APU Compartment and Air Intake Duct for Oil Contamination (GTCP 36-300)
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 499100-02
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific black light No specific bright light source No specific circuit breaker(s) safety clip(s) No specific degreaser No specific steam cleaner No specific access platform 3.5 m (11 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized Configuration before Maintenance Action 29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
 the Ground Connector 49-00-00-860-003 APU Start by External Power (GTCP 36-300) 49-00-00-860-004 APU Shutdown by External Power (GTCP 36-300) 52-41-00-010-001 Open the APU Doors for Access 52-41-00-410-001 Close the APU Doors after Access 21-00-00-615-001 Decontamination of the Environmental Control System
 (ECS) when the Temperature is below 24 deg.C (APU) (for corrective action)
 21-00-00-615-002  Decontamination of the Environmental Control System (ECS) when the Temperature is above 24 deg.C (APU) (for corrective action)

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION ------------------------------------------------------------------------------- -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-23-51-000-001  Removal of the APU Generator 8XS (for corrective
 action)
 24-23-51-400-001  Installation of the APU Generator 8XS (for corrective
 action)
 49-11-11-000-001  Removal of the Auxiliary Power Unit (APU) - 4005KM
 (GTCP 36-300) (for corrective action)
 49-11-11-400-001  Installation of the Auxiliary Power Unit (APU) -
4005KM (GTCP 36-300) (for corrective action)
 49-16-00-100-001  Cleaning of the APU Air Intake System (GTCP 36-300)
 (for corrective action)
 49-16-00-210-001  Detailed Inspection of the Air Intake, Diffuser
 Elbow, Seals and Felt Metal (GTCP 36-300) (for
 corrective action)
 49-16-45-000-001  Removal of the Air Intake Diffuser and Elbow (GTCP
 36-300) (for corrective action)
 49-16-45-400-001  Installation of the Air Intake Diffuser and Elbow
 (GTCP 36-300) (for corrective action)
 49-17-41-400-001  Installation of the Drain Tank (GTCP 36-300) (for
 corrective action)
 49-26-53-000-001  Removal of the Regulating Gearbox Valve (8016KM)
 (GTCP 36-300) (for corrective action)
 49-26-53-400-001  Installation of the Regulating Gearbox Valve (8016KM)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 機載輔助動力 AIRBORNE AUXILIARY POWER1(125)