__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)
 No specific access platform 2.06 m (6 ft. 9 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power 28-42-34-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 28-42-34-861-050
 A. Energize the ground service network (Ref. TASK 24-42-00-861-001).
 1EFF : ALL 1 28-42-34Page 401 1 1 Feb 01/98 1 1 1CES 1 Subtask 28-42-34-865-050

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHANNEL/1 AND 2 8QT L26 121VU FUEL/FQI/CHAN/2 2QT M27
 Subtask 28-42-34-010-050
 C. Get Access
 (1)
 Put the access platform in position at the access door 811.

 (2)
 Open the access door 811.

 4. Procedure
_________ (Ref. Fig. 401/TASK 28-42-34-991-001) Subtask 28-42-34-020-050
 A. Removal of the FQIC (3QT)
 (1)
 Loosen the knurled nuts (3).

 (2)
 Remove the FQIC (4) from its rack (2).

 (3)
 Put blanking caps on the disconnected electrical connectors.

 1EFF : ALL 1 28-42-34Page 402 1 1 Feb 01/98 1 1 1CES 1

 Fuel Quantity-Indicating Computer (FQIC)
 Figure 401/TASK 28-42-34-991-001
 1EFF :  ALL  1  28-42-34 Page 403 
1  1  Feb 01/98
 1  1
 1CES  1

 TASK 28-42-34-400-001
 Installation of the Fuel Quantity-Indicating Computer (FQIC) (3QT)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  access platform 2.06 m (6 ft. 9 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001  Energize the Ground Service Network from the External Power
 24-42-00-862-001  De-energize the Ground Service Network Supplied from
 the External Power
 28-42-00-740-001  Status Report (BITE)
 28-46-00-740-001  Functional (BITE) Test
R  32-69-00-860-001 Simulation of Flight, with the Aircraft on the Ground 28-42-34-991-001 Fig. 401
 3. Job Set-up
__________
 Subtask 28-42-34-860-050

 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the ground service network is energized (Ref. TASK 24-42-00-861-001).

 (2)
 Make sure that the access platform is in position at the access door

 811.

 (3)
 Make sure that the access door 811 is open.

 1EFF : ALL 1 28-42-34Page 404 1 1 Aug 01/04 1 1 1CES 1 1EFF : ALL 1 28-42-34Page 405 1 1 Aug 01/04 1 1 1CES 1

 Subtask 28-42-34-865-051
 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHANNEL/1 AND 2 8QT L26 121VU FUEL/FQI/CHAN/2 2QT M27
 4. Procedure_________
 (Ref. Fig. 401/TASK 28-42-34-991-001)
 Subtask 28-42-34-420-050
 A. Installation of the FQIC (3QT)
 (1) Remove the blanking caps from the electrical connectors.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUEL 燃油5(81)