2.
Push the MCDU MENU mode key.
3.
On the MCDU:
A. Push the line key adjacent to the AIDS indication.
B. Push the line key adjacent to the CALL-UP PARM ALPHA> indication.
4.
On the MCDU keypad enter the code for ROLL into the scratchpad.
The MCDU is on.
The MCDU MENU page comes into view.
On the MCDU display:
The AIDS menu page comes into view.
The AIDS PARAM ALPHA CALL-UP menu pagecomes into view.
ROLL appears at the bottom of thedisplay (scratchpad).
1EFF : ALL 1 12-11-28Page 358 1 1 May 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
5.
Push the 1L line key.
6.
Read and write down the ROLL data.
7.
On the MCDU keypad enter the code for PTCH into the scratchpad.
8.
Push the 2L line key.
9.
Read and write down the PITCH data.
10.
Push the line key adjacent to the CLR key, and push the line key adjacent to the data field.
The ROLL data shows - RECORD THE DATA.
PITCH appears at the bottom of thedisplay (scratchpad).
The PITCH data shows - RECORD THE DATA.
The scratchpad display is cleared.
(2)
In Table 1, use the PITCH data to find the equivalent number.
(3)
In Table 1, use the ROLL data to find the equivalent letter.
(4)
Put together the number and the letter to identify the square to use in the MLI procedure (Ref. TASK 12-11-28-650-007).
TABLE 1
Pitch Ref Roll Ref
minus 1.5 1 minus 1.5 A
minus 1.0 2 minus 1.0 B
minus 0.5 3 minus 0.5 C
0.0 4 0.0 D plus 0.5 5 plus 0.5 E plus 1.0 6 plus 1.0 F plus 1.5 7 plus 1.5 G
R 1EFF : 201-202, 1 12-11-28Page 359 1 1 May 01/05 1 1 1CES 1
**ON A/C ALL
5. Close-up
________ Subtask 12-11-28-860-070
A. Aircraft Maintenance Configuration
(1)
On the panel 20VU set the 3 switches on the ADIRS to the OFF position.
(2)
On the MCDU control panel:
(a) Push the RETURN key until the initial screen shows.
(b) Set the BRT knob to the OFF position. Subtask 12-11-28-862-054
B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : ALL 1 12-11-28Page 360 1 1 May 01/05 1 1 1CES 1
TASK 12-11-28-860-002
Procedure to use the FQIC Input Parameters to Find the Pitch and Roll Data
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-007 Use of Magnetic Level Indicators (MLI) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-001 Procedure to Get Access to the SYSTEM REPORT/TEST
Menu Page 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure 34-10-00-860-002 ADIRS Start Procedure 34-10-00-860-005 ADIRS Stop Procedure
3. Job Set-up
__________
Subtask 12-11-28-860-071
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (Ref. TASK 31-60-00-860-001).
(3)
Get access to the SYSTEM REPORT/TEST Menu Page (Ref. TASK 31-32-00-860-001).
(4)
Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
R 1EFF : ALL 1 12-11-28Page 361 1 1 May 01/05 1 1 1CES 1 Subtask 12-11-28-865-054
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FUEL/FQI/CHAN/1 1QT A13 121VU FUEL/FQI/CHANNEL/1 AND 2 8QT L26 121VU FUEL/FQI/CHAN/2 2QT M27
4. Procedure
_________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 12-11-28-860-072
A. Get Access to the FQIC Input Parameters Page 1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM SERVICING 1(35)
