曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

24 characters, including a zero terminator. [FS2002+ only]
3160 24
ATC aircraft type string for currently loaded user aircraft. This is limited to a maximum of
24 characters, including a zero terminator. [FS2002+ only]
P a g e | 6
______________________________________________________________
© by Spyy 2010
Because X-Plane is not providing these values you can change them here. The will be stored
in the XPUIPC.ini file (refer to page 9 xpuipc_ini). If you fire up X-Plane these values will be
read and provided via the above offsets.
2. Installation
XPUIPC Plugin
Put XPUIPC.xpl into your plugin folder of X-Plane. XPUIPC contains the XPWideServer
application.
P a g e | 7
______________________________________________________________
© by Spyy 2010
XPWideClient
Put the XPWideClient.exe and XPWideClient.ini files on the client PC in a directory of your
choice. These two file must be in the same directory. To start the client just double click the
icon. If there is no XPWideClient.ini before you start XPWideClient, the program will do this
for you. Just start it => it generates the ini file with the default server address (see below).
Put in the XPWideClient.ini the IP address of the PC where X-Plane is running (e.g.
192.168.0.1) only this naming is possible (no names like Server, or host etc). There is no
special checking yet, so be careful.
Start XPUIPC/XPWideServer
To start XPUIPC no further actions are required. XPWideServer is included in the XPUIPC
plugin. Just fire it up with X-Plane. It will loaded by X-Plane. You can see if it is loaded and
enabled in the plugins menu:
P a g e | 8
______________________________________________________________
© by Spyy 2010
P a g e | 9
______________________________________________________________
© by Spyy 2010
XPUIPC generates three files in the X-Plane root directory after the first run:
 XPUIPC.ini:
You can edit it for your choice what is behind the “=” char. The values can also be set via the
XPUIPC menue (please refer to page 4 XPUIPC_menue).
The [XPUIPC SETTINGS] section is responsible for the “tune up, tune down” value. Valid
values are from 0 up to 20.
The [XPUIPC ATC SETTINGS] section is responsible for the ATC strings which control the
offsets:
3130 12
ATC flight number string for currently loaded user aircraft. This is limited to a maximum
of 12 characters, including a zero terminator. [FS2002+ only]
313C 12
ATC identifier (tail number) string for currently loaded user aircraft. This is limited to a
maximum of 12 characters, including a zero terminator. [FS2002+ only]
3148 24
ATC airline name string for currently loaded user aircraft. This is limited to a maximum of
24 characters, including a zero terminator. [FS2002+ only]
3160 24
ATC aircraft type string for currently loaded user aircraft. This is limited to a maximum of
24 characters, including a zero terminator. [FS2002+ only]
The maximum length of the strings are:
 ATC Number -> 12 chars
 ATC Tail Number -> 12 chars
 ATC Airline name -> 24 chars
 ATC Aircraft type -> 24 chars
P a g e | 10
______________________________________________________________
© by Spyy 2010
 XPUIPC.log:
If you have done some logging (please refer to page 4 xpuipc_settings) the values are stored
in the XPUIPC.log file.
 XPUIPC.txt:
In the XPUIPC.txt file just status information of XPUIPC/XPWideServer are stored for error
tracking.
P a g e | 11
______________________________________________________________
© by Spyy 2010
 XPUIPCOffsets.cfg:
The XPUIPCOffsets.cfg file contains offsets which can be created by user. The syntax how to
create new offsets you will find in the XPUIPCOffsets.cfg file itself.
The file is located direct in the plugin folder. If there is none no external offset will be
computed by XPUIPC.
3. General
Use it for your own risk.
It is like it is, in beta stage and has the following limitations:
 Tested with Boeing pfd, mcp and CDU and Airbus pfd
 Tested on Windows VISTA an Win2000 (Client and Server)
 Tested with X-Plane 9.41
 X-Plane 9.00+ only
 Tested with Boeing 737-300 located here: http://xplanefreeware.net/
 and 737-xxx of Benedikt Stratmann located here:
http://x-plane.benedikt-stratmann.de/
 Max. 8 clients
 Available FSUIPC Offsets -> please refer to page 18 Available_offsets.
Hints:
P a g e | 12
______________________________________________________________
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料41(120)