曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

wheel hubs, thrust reverse
mechanisms. Wipe on nacelles.
Q. Is ACF-50 approved by the US Government?
A. Yes ACF-50 is US Government performance qualified to Mil-C-81309E, Type II
class I.
Q. Does ACF-50 meet any other aerospace industry standards or have any OEM
approvals?
A. Yes ACF-50 meets aerospace anti-corrosion requirements for many OEM’s; AIRBUS,
BOEING, DOUGLAS and others, see the reverse side of this document for a complete listing
as well as additional OEM recommendations.
Q. How long has Lear Chemical been producing Thin Fluid Film anti-corrosion compounds
and how long has ACF-50 been in the marketplace?
A. Lear has twenty five years experience as a chemical manufacturer and ACF-50 has an
excellent fourteen year track record as a product used by industry professionals who want
performance they can trust.
Q. Is ACF-50 Toxic?
A. No. Complete toxicology tests (oral-eye-dermal) have been performed on ACF-50 by world
renowned Hazelton Laboratories. Their testing concluded that ACF-50 is Non-Toxic according
to EPA and OCED standards.
Q. What does the FAA think about ACF-50?
A. While the FAA is not in the habit of providing general approvals they do have at least two
criteria for accepting a product. Their primary method for acceptance is for an OEM to list
the product in their aircraft maintenance manual. The second method is for a product to
meet a Mil-Spec. Since ACF-50 meets both of these criteria the FAA finds ACF-50 an
acceptable product as a general corrosion preventative for use on aircraft (letter dated Aug.
13/96).
Q. Does ACF-50 meet US State requirements for Volatile Organic Content (VOC)?
A. Yes ACF-50 is VOC compliant in all fifty states. ACF-50’s VOC content is well below the
tough air quality control regulations in California.
Q. How often does ACF-50 need to be applied to the airframe?
A. We recommend a minimum of once every two years. Shorter or longer intervals will be prescribed
depending on the aircraft’s operational environment.
Q. What type of equipment do I need to apply ACF-50?
A. The most economical way to treat an airframe is with our specially designed spray system.
Its light weight, compact size, ergonomic design, and aircraft quality construction provides
for efficient product usage and minimal labor investment. The system works on 40 psi. @, 4
to 5 CFM.
Q. Does ACF-50 loosen rivets?
A. No. ACF-50’s low shear formula will penetrate around a tight rivet removing moisture without
causing it to loosen. Unlike other products ACF-50 does not contain EP (extreme pressure)
additives. The presence of these undesirable additives could cause rivets to loosen and
faying surfaces to loose their structural cohesiveness.
Q. Will ACF-50 harm aircraft plastics, paint, or wiring?
A. ACF-50 was tested for stress crazing on acrylic plastic and for effect on aircraft grade
paints with both tests showing no deleterious effects. ACF-50 was tested on polyimide insulated
wire and found to have no negative effects.
ACF-50 “the Professionals Choice” gives you the peace of mind that your investment is receiving the best possible protection.
TEST IDENTITY TEST METHOD RESULTS
BMS 3-23E
Table l
-Flash Point ASTM D93 Pass
-Sprayability MIL-C-1617D Pass
-Low-Temperature Adhesion MIL-C-1617D Pass
-Nonvolatile Content ASTM D1644 QPL Value
-Detectability Pass
-Removability Pass
-Storage Stability Pass
-Drying Time Pass
-Compatibility with Cadmium Pass
Douglas Aircraft CSD #1
- Painted Surfaces ASTM F 502 Conforms
- Residue Surfaces ASTM F 485 Conforms
- Sandwich Corrosion Test Conforms
- Stress Crazing Acrylic Plastics ASTM F 484 Conforms
- Immersion Corrosion Test ASTM F 483 Conforms
- Cadmium Removal Test ASTM F 1111 Conforms
Douglas Aircraft DMS 2150
- Film Characteristic Conforms
- Product Composition Conforms
- Appearance Conforms
- Toxicity Conforms
- Flash Point ASTM D-56 Conforms
- Nonvolatile Content ASTM D-1644A Conforms
- Viscosity ASTM D-445 Conforms
- Salt Fog Exposure ASTM B-117 Conforms
- Water Displacement Conforms
- Removability Conforms
- Storage Stability Conforms
Table ll
-Water Displacement Ability MIL-C-1617D Pass
-Viscosity QPL Value
-Corrosion Inhibiting Characteristics FED-STD 791 Pass
(ASTM G 34)
-Functional Penetration Test Pass
Airbus Industrie
TN A 007.10138
Type 1 Grade 1 / 2
Volatile Organic Content
-California Air Quality Compliant ASTM 2369 >166.9g/L
Misc.
-Humidity Resistance AMS 3066B Conforms
-Hydrogen Embrittlement ASTM F 519 Conforms
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料29(52)