曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

issue replenishment signals to suppliers, confirm receipt, and monitor status on Signum’s visual
board. Customizable alerts and control signals control routine transactions and exceptions.
With each transaction stored in Signum’s data repository, process improvements can be guided by
hard facts on supplier performance and reliability.
The Supplier’s Tool
Curator allows suppliers to view and
confirm kanban orders as well as anticipate
and prepare for upcoming changes in
demand. When the supplier confirms,
denies, or ships an order, inventory and
order status are automatically updated in
Signum. When a kanban signal is triggered,
suppliers receive an email link to the
Curator web page, and simply click to view
the order details.
Both the manufacturer and supplier
interfaces are intuitive and visual. With
accessibility in mind, Datacraft has even
supplemented the green, yellow, and red
color-coding of signal health with easily
recognized shape cues.
Rock-Solid Reliability: Our back-end is a pool of multiple servers, all of which are transparent to
our clients. If any one of the servers should fail for any reason, connections are seamlessly
transferred to the others instantaneously. Datacraft guarantees 99.999% carrier-class guaranteed
uptime, with 3 OC-3 connections to the data center and both in-house and offsite mirroring and
redundancy, as well as around-the-clock closed-caption video.
Exceptional Support: Datacraft’s commitment to customer support goes far beyond 24/7/365
availability. Their support consultants are highly knowledgeable about real-world lean
manufacturing as well as Datacraft products, and they are committed to customer success.
4
“I’ve worked with
numerous database
systems and have never
experienced such a
response from MIS
people. They don’t just
say, ‘Fill in this vanilla
form and make your
processes fit’.
“They listen and really
try to understand and
respond to our
requests.”
Avure Technologies Incorporated
22408 66th Avenue South
Kent WA 98032 USA
P 253.981.6350 F 253.981.6230
www.avure.com
FOR IMMEDIATE RELEASE
Media Contacts
Americas
Glenn Hewson
+1 253.981.6239
glenn.hewson@avure.com
Europe/Asia
Sture Olsson
+46 21.327.241
sture.olsson@avure.se
DEMA SpA. reduces sheet metal forming costs with new fluid cell press
The DEMA Group is a rapidly growing designer and manufacturer of aerospace
components, serving as a Finmeccanica sub-supplier to Airbus, Boeing and other
major OEMs. Founded in 1993 as a small enterprise, DEMA today has a payroll
of more than 600 employees, with headquarters in Naples, Italy and several
modern facilities in the Campano/Pugliese aeronautical industrial district, Emilia
Romagna and Lombardia. The company also has operations in Canada and
Tunisia.
Growth in demand has created a need for expanded capacity in the group’s
sheet metal forming operations, which had been using a low-pressure rubber pad
press for the bulk of its production. DEMA management evaluated the potential
efficiency improvements of both a newer rubber pad press and a Flexform™ fluid
cell press from Avure Technologies prior to making a purchasing decision. Test
runs were conducted on seven different sheet metal parts, measuring and
recording parameters including production speed, manual part reworking time,
part quality off the press, processing flexibility, and equipment and maintenance
costs.
The results clearly favored the Flexform press. Total production and reworking
time for the seven test samples was 26 percent that of the existing rubber pad
press and 50 percent of the newer rubber pad press. The 800 bar operating
pressure of the fluid cell press, substantially higher than the other presses
evaluated, produced more accurate forming to close tolerances and resulted in a
significant reduction of spring back. Hours required for manual rework and
calibration were reduced by 76 percent.
The press selected by DEMA was the Flexform QFC 1x2-800, a new mid-size
model introduced by Avure in 2007 to better fit the capacity and part size
requirements of Tier 1 suppliers such as DEMA Group. It’s 1 x 2 meter forming
tray can produce multiple parts in a single two-to three-minute cycle, and is well
suited to the lower volumes and frequent tool changes commonly encountered in
the aerospace industry. Pressure is applied by a flexible diaphragm which has
been redesigned to cost a fraction of older styles and can be repaired or replaced
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料29(20)