曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

bianagale@bssm.org
If you have a
story which
you would like
included in the
next issue of
Dimensions
please contact
the Editor,
Professor
Margaret Lucas
at
m.lucas@mech.gla.ac.uk
Several types of continuous fibre
reinforcements are available for advanced
textile reinforced composite materials,
including woven, stitched and braided
fabrics. Textile industries are constantly
enhancing weaving and stitching
technologies for such reinforcements in
order to reduce material cost and compete
against other materials for structural
applications, such as metals and ceramics.
However, a barrier to wider application of
textile reinforced composites is their
secondary manufacturing processes, which
tend to be relatively slow and labour
intensive compared with equivalent
processes for more traditional materials.
Slower manufacturing means higher
product cost and often limits application of
textile composites to expensive aerospace
and military components. To reduce
manufacturing time, automated
manufacturing methods such as press
forming are being adapted to suit textile
composites. This technique is particularly
suited to thermoplastic matrix textile
composites which can be heated, formed
and cooled within a short processing
window.
A common practice in the past was to
determine optimum forming conditions for
a given material by trial and error, where
various combinations of process
parameters were evaluated experimentally.
Rapid advances in numerical technology
and computational capability have seen
the rise of ‘virtual manufacturing’ as an
essential tool in optimising the press
forming of more traditional materials such
as metals and plastics where computational
techniques such as finite element analysis
are used to simulate the press forming
process. In order to apply similar virtual
manufacturing CAE tools to textile
composites, constitutive models that can
predict the large deformation behaviour of
textile composites during forming are
required. Development of such models is
one of the main research interests of Dr
Philip Harrison working within the Materials
Engineering Group at the University of
Glasgow. A fundamental aim of this work
has been to predict this forming behaviour
from the fabric’s meso-scale structure, such
as the fabric’s weave style and, for noncrimp
fabrics, from the fabric’s stitching
pattern. To do this, multi-scale modelling
methods are used which lend themselves
well to analysing the repeat structure of
typical fabric architectures.
The weave style of a fabric affects it’s forming
behaviour during manufacture.
Once these constitutive models are
implemented in the finite element code,
forming predictions have to be verified
against experimental results. This involves
comparing both force and strain
predictions, where the latter can be
measured conveniently using full-field
optical imaging techniques such as stereo
photogrammetry
Forming prediction of a textile composite over
hemispherical geometry.
This research is part of a wider
collaboration involving several UK and
international research groups. Phil Harrison
Forming of Textile Composites
Lines drawn on the material before forming (top)
help in determining the full-field strain map
(bottom) across the surface of the doubly curved
part (a helicopter pilot helmet). The fibre shear
angle is indicated using a colour map.
is an active member of the Composite
Forming International Benchmarking
Initiative, designed to compare and
evaluate the various modelling approaches
adopted by different research groups
working in this field.
Contact: Dr Phil Harrison,
p.harrison@mech.gla.ac.uk
Member access to
online presentations
BSSM members can access copies of all past
seminar and workshop presentations for free
by visiting www.bssm.org/pastpresenations
BSSM members can only access this page using their
relevant username and password. If you do not have
your username and password please follow the
relevant link on the BSSM home page,
www.bssm.org in order to obtain your security details.
If you have any problems accessing your details please contact info@bssm.org
Forthcoming Events
Please visit the BSSM
website at www.bssm.org
for more information about
forthcoming BSSM events
Dimensions • February 2009 • 7
John Edwards, Executive Officer -
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料29(28)