曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Champaign)
under the
supervision of
Prof. Glaucio H.
Paulino.
Contact:
marco.alfano@gmail.com
News from Dantec
engine nacelles with high spatial resolution
and close to the model surfaces. The
solution was to use a Dantec Dynamics 3D
FiberFlow Laser Doppler Anemometer
(LDA) system. The system was set up
outside the working section of the Airbus
wind tunnel in Bristol, UK.
 A continuous wave laser can now be
used with a Dantec Dynamics iNanoSense
camera to make successful PIV
measurements in liquid flows. We have
carried out measurements in our laboratory
and at customers’ facilities using a 10mW
Helium Neon laser and achieved
outstanding results using silvered spheres
as seeding particles. The images captured,
at camera frame rates that can exceed
1kHz, produce vector maps with
interrogation areas down to 16 x 16 pixels
with very few outliers. The system is quick
and easy to apply to flow facilities owing to
The left image shows the detection of wrinkles in a turbine blade with the right image showing the full
field strain in the same blade section, the correlation between the two can easily be seen.
the compact dimensions of modern low
power continuous wave lasers.
 Defects in composites are unfortunately
part of modern production, however
understanding these defects is the key.
Laser shearography allows fast 100%
inspection of composite parts, digital image
correlation (DIC) can then be used on
specific areas to assess the severity of found
defects through full field strain
measurement. This can create an
accept/reject criteria for production control.
Dantec are a leading supplier of both
digital image correlation (DIC) and Laser
shearography systems, their latest
integrated software platform allows both
systems to run from one high performance
laptop.
Contact: Rob Wood,
rob.wood@dantecdynamics.com
The new GOM software version 6.1.1
offers numerous enhancements including
extended ATOS Touch probe functionality,
optimisation for quad core image
processing computers, enhanced GD&T
module, Microsoft Windows integration
and the ARAMIS and PONTOS Real Time
Sensor. The GOM Software version 6.1.1
can be integrated into existing process
chains and workflows offering an extensive
measurement and evaluation solution for
all GOM's measuring systems.
GOM’s new generation of ARAMIS
sensors has been developed to be
compact, mobile, stable and robust, with
high accuracy, high resolution and fast
image acquisition. The new generation
contains a number of significant features
like new cameras, tool-free-mountings,
integrated illumination etc.
To further cope with the ever
increasing demands for higher speed and
handling of larger projects, GOM offers the
high-end image processing computer with
dual quad core CPUs.
New products from GOM
Many complex metrology applications
require the combination of full-field and
point based 3D measurement. The GOM
Touch Probe as an add-on to the ATOS 3D
Digitizer combines non-contact full-field
surface measurement with tactile online
probing within one system. Due to the
measurement of optically hidden surfaces
as well as fast online-inspection of single
points and primitives, the GOM Touch
Probe offers a number of advantages for
the casting industry.
Ever more complex components, more
sophisticated technical requirements, new
materials and shorter product cycles pose
new challenges and tasks for the ceramic
industry as development times are
continuously being shortened. Optical 3D
measuring technology can provide
advantages in all stages of product
development of a ceramic product, e.g.
during tool and mold development as well
as during the production process.
Read more at:
http://www.gom.com/EN/index.html
Qualitative Quantitative
Laser Shearography Digital Image Correlation
Acoustic Emission monitoring
of bridge structures
Cardiff University have developed
techniques in conjunction with Physical
Acoustics Limited, to enable a wide range
of bridges and bridge components to be
monitored for damage. Monitoring
techniques have been developed through
laboratory and field investigations over a
ten year period. A particularly successful
technique, called “BOXMAP”, was
developed for more accurate source
location in steel box girder bridges. This
technique is currently being commercially
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料29(24)