曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

CITATION MUSTANG OPERATING MANUAL
HDG 035°
21
S
15
12
E
6
3
N
33
30
W
24
305
GPS
RAT 0°C ISA +15°C
130
M1 2.4011
RAT 0°C ISA +15°C
HDG 035°
15
12
E
6
3
N
33
145
GPS
RAT 0°C
ISA +15°C
130
120
125
60
750
1000
750
1000
27
200
27
7500
5.0
UP
0
142.8 N2% 142.8
OIL
PSI
°C
FUEL
LBS
PPH
DC VOLTS
DC AMPS
CABIN PRESS
ALT FT
DIFF PSI
FLAPS
BATT VOLTS
°C
27
200
125
60
NORMAL DISPLAY REVERSIONARY MODE
Figure 16-29. Ram Air Temperature Box
OPTION 3 OFF
OPTION 1 OPTION 2
Figure 16-28. Wind Data Box
21
S
15
12
E
6
3
N
33
30
W
24
117° 4
14900
30.04IN
CRS 633°
TERM
XPDR1 1259 ALT R LCL 17:12:20
LCL 17:41:40
Figure 16-30. System Time Box
MULTIFUNCTION
DISPLAY
DESCRIPTION
This section provides a basic discussion of
MFD displays and controls, and is intended to
provide the pilot a useful understanding of
the purpose and organization of the MFD
(Figure 16-32).
The G1000 includes a single 15-inch MFD in
the center of the instrument panel. The MFD
provides indications for:
• EICAS
• Moving-map displays (with depictions of
navigation references and flight hazards)
• Information pages on waypoints, instrument
flight rule (IFR) procedures, airports,
airways, and navaids
• Flight planning
• Navigation status indications
• System status indications
The MFD also provides an alternate display
for essential flight instrumentation from either
PFD through the use of reversionary mode.
The MFD has many possible settings and
displays. For additional details, refer to the
supplemental G1000 manuals and documents
supplied with the Citation Mustang.
MFD CONTROLS
The MFD is controlled by softkeys across the
bottom of the MFD bezel, a n d b y t h e
MFD/FMS controller on the cockpit pedestal,
below the throttle quadrant (Figure 16-33,
Tables 16-6 and 16-7).
MFD Softkeys
MFD softkey functions are variable depending
on user inputs. Each softkey has a label
above it, which indicates its current function.
MFD/FMS Controller
The MFD/FMS controller includes an alphanumeric
keypad for direct entry of numbers
and text.
Dual FMS Knob
The dual FMS knob on the MFD/FMS controller
is the main control for selecting most
MFD functions. The large knob selects page
groups, while the small knob selects individual
pages within the selected group.
For data entry, pressing the dual FMS knob activates
the cursor, which allows the user to
input new data. While the cursor is active, rotating
the large FMS knob allows the user to
move to different data entry locations on the
display, as indicated by cursor movement.
While the cursor is active, rotating the small
FMS knob allows the user to change the text
or data at the cursor location.
Rotating the FMS knob causes each possible
character to display sequentially. When the
correct entry at the cursor location is selected
with the small FMS knob, confirm by pressing
the ENT key. It moves to the next position
when you press ENT.
510OM-00 16-27
CITATION MUSTANG OPERATING MANUAL
TIMER 01:04:45 UP STOP?
REFERENCES
Figure 16-31. Timer References Window
16-28 510OM-00
CITATION MUSTANG OPERATING MANUAL
Figure 16-32. Multifunction Display
510OM-00 16-29
CITATION MUSTANG OPERATING MANUAL
1 3 2 4 5
6
7
8
9
14 13 12 11 10
Figure 16-33. MFD Controller
16-30 510OM-00
CITATION MUSTANG OPERATING MANUAL
CAS
CAS
MAP
TRAFFIC
TOPO
TERRAIN
SW CHRT
CHKLIST
AIRWAYS
NEXRAD
XM LTNG
BACK
DCLTR
AIRWY ON
AIRWY LO
AIRWY HI
DCLTR-1
DCLTR-2
DCLTR-3
MFD
SOFTKEYS FUNCTION
Scroll up (enabled only when a sufficient number of items are displayed in the
crew alerting system display to warrant scrolling)
Scroll down (enabled only when a sufficient number of items are displayed in
the crew alerting system display to warrant scrolling)
Enables second-level Navigation Map softkeys
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Cessna塞斯納公務機飛行手冊(110)