曝光臺(tái) 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

CSP 700−5000−6
Volume 2
06−10−13
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
Pressing the page key once will change the RMU display to the Menu page. When not on
the radio tuning page (main or system page ), the RMU assigns a RETURN function to the lower
left line select key. Pressing this key returns the display to the radio tuning page.
GF0610_030
COM1
118.00
130.27
151.67
131.27
2
3
1 4
5
6
INSERT
DELETE
MORE
RETURN
MEMORIES
NB NARROW
BANDWIDTH
SELECT
RADIO PAGE
COM MEMORY
NAV MEMORY
ATC/TCAS
HF CONTROL
HF MEMORY
SYSTEM 1 PAGE MENU
Pressing the store key results in a temporary (TEMP) COM/NAV preselect frequency to be
stored in memory.
GF0610_032
130.27
TEMP−1 TEMP−1
113.10
ATC/TCAS ADF1
COM1 NAV1
118.00 112.00
NB
130.27
MEMORY−1 TEMP−1
113.10
ATC/TCAS ADF1
COM1 NAV1
118.00 112.00
NB
The temporary preselect frequency is assigned a numbered location, provided the cursor has been
first placed around that frequency or code.
COMMUNICATIONS
Flight Crew Operating Manual Rev 3, Apr 25, 2005
CSP 700−5000−6
Volume 2
06−10−14
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
While on the main tuning page, press the function key once to display the SYSTEM 1
PAGE MENU. Next press the line select key for the COM MEMORY to view the frequency held in
memory.
GF0610_033
COM1
118.00
130.27
2
3
1 4
5
6
INSERT
DELETE
MORE
RETURN
MEMORIES
NB NARROW
BANDWIDTH
Step 1 SELECT
Step 2 SYSTEM 1 PAGE MENU
RADIO PAGE
130.27 COM MEMORY
MEMORY−1 TEMP−1
113.10
ATC/TCAS ADF1
COM1 NAV1
118.00 112.00
NB
Pressing the identification key places the transponder in the identification response mode.
The transponder will go into ident mode for approximately 18 seconds when the ID function key is
pushed and an ID annunciator will appear.
GF0610_035
Identification
Annunciator
118.02
MEMORY−4
NB
1 ATC ALT ADF
ATC/TCAS ID ADF1
COM1 NAV1
121.82 108.30
1799.5
DME IUL
109.30
1200
COMMUNICATIONS
Rev 3, Apr 25, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
06−10−15
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
A self test sequence of any radio is available. Press/hold the key with the cursor placed
around the frequency or code to activate an internal test sequence of the selected system.
GF0610_037
ADF ERR
TEST
ADF−TEST
TEST
TEST
TEST
HF1
ADF1
HF1
ADF1
HF1
ATC/TCAS ADF1
TCAS DSPY 1
COM1 NAV1
118.00 131.10
1605
2000
ADF1
HF1
131.27
MEMORY−1 TEMP−1
112.00
2000
ADF PASS
NB
STANDBY
UV
ALT:REL
NORMAL
NOTE
Not all of the test events which
can be displayed are shown.
Only the ADF Pass/Error
example is represented.
OR
ADF1
HF1
NB
ATC/TCAS
TCAS DSPY 1
COM1 NAV1
118.00 131.10
1605 620.0
2000
131.27
MEMORY−1 TEMP−1
112.00
2000
STANDBY ANT
UV
ALT:REL
NORMAL
The key must be held down for the duration of the test for approximately:
· 2 seconds for VHF COM and HF COM.
· 5 to 7 seconds for DME, ATC, ADF.
· 20 seconds for NAV (VOR/ILS).
· The TCAS test function is as follows.
After the test is complete, a PASS or ERR (error) legend will appear in the window.
NOTE
If the key is held for 30 seconds or more, the radios are
automatically commanded back into normal operation.
Releasing the key at any time, immediately returns the function to normal operation.
COMMUNICATIONS
Flight Crew Operating Manual Rev 3, Apr 25, 2005
CSP 700−5000−6
Volume 2
06−10−16
RADIO MANAGEMENT SYSTEM (CONT'D)
Function Keys (Cont’d)
Pressing the key “deslaves”
the DME from the active VOR frequency, so a different DME
channel may be tuned, without changing the active VOR. Successive presses of the “DME” key
enables display and selection of the DME channels in VHF and TACAN formats.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Bombardier_Global_000-Communications(6)