曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

CSP 700−5000−6
Volume 2
06−10−7
RADIO MANAGEMENT UNIT (RMU) DISPLAY
The following is a description of the panel controls and information available on the RMU.
GF0610_013
Transfer Key
Tuning Knobs
Function Keys
Cursor Box
Photo Sensor
Line Select
Keys
Main Tuning Page
COM1 NAV1
ATC/TCAS ADF1
TCAS DSPY 1 HF1
NB
MEMORY−1
STANDBY
ALT:
118.00
131.27
TEMP−1
131.10
112.00
1605
ANT
620.0
REL
NORMAL 2000
2000
LV
GF0610_014
RMU 1 (Pilot’s) RMU 2 (Copilot’s)
118.02
MEMORY−4
ALT:
MEMORY−1
110.00
NB
REL
NORMAL
STANDBY ADF
LV
TCAS DSPY 2
ATC/TCAS ADF2
HF2
COM2 NAV2
121.82 117.45
1200 1799.5
15423
15600
NB
REL
NORMAL
STANDBY ADF
LV
118.02
MEMORY−4
ALT:
MEMORY−1
110.00
ATC/TCAS ADF1
TCAS DSPY 1 HF1
COM1 NAV1
121.82 117.45
1200 1799.5
15423
15600
PILOT’S
WINDOW
Contains the
following:
COM 1
NAV 1
ATC/TCAS
ADF 1
TCAS
DSPY 1
HF 1
COPILOT’S
WINDOW
Contains the
following:
COM 2
NAV 2
ATC/TCAS
ADF 2
TCAS
DSPY 2
HF 2
COMMUNICATIONS
Flight Crew Operating Manual Rev 2A, Apr 11, 2005
CSP 700−5000−6
Volume 2
06−10−8
RADIO MANAGEMENT SYSTEM
The RMU is mounted in the centre pedestal. It is a colour Liquid Crystal Display (LCD) based radio
tuning controller that provides centralized control and display of frequencies, channels, codes and
modes set on the communications and navigation receivers. Each RMU provides single point control
of both the onside
and crossside
radios. The RMUs provide onside
and crossside
access to the
following radios:
RMU − 1 RMU − 2
VHF COM − 1 VHF COM − 2
VHF NAV − 1 VHF NAV − 2
DME − 1 DME − 2
ADF − 1 ADF − 2
ATC − 1 ATC − 2
TCAS DSPY 1 TCAS DSPY 2
HF − 1 HF − 2
The RMU uses the concept of selecting a function by pushing a line select key next to the parameter
that you wish to control. Any selectable parameter may be changed by pressing the corresponding
line key next to the displayed parameter and then rotating the concentric tuning knobs to set the
desired value.
The RMU display is divided into dedicated windows. Each window groups the data associated with a
particular function of the radio system. The windows COM, NAV, ATC, HF, ADF and TCAS each
provide for complete control of frequency and operating mode of the associated function.
The RMU also has other display modes, called pages, which perform additional features and
functions for the control of the radio system. A menu of the pages is provided to access these
additional functions.
Located on the front of the RMU is a button labeled PGE, which when pressed, causes the system
page menu to be displayed. Pressing PGE will allow the selection of other functions such as:
· Radio page: Normal tuning.
· COMM memory: Preset COMM frequencies.
· NAV memory: Preset VOR NAV frequencies.
· ATC/TCAS: ATC/TCAS display parameters.
· HF control: Preset and Direct tune modes.
· Maintenance: Access to maintenance data only on ground.
COMMUNICATIONS
Rev 2A, Apr 11, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
06−10−9
RADIO MANAGEMENT SYSTEM (CONT'D)
General Colour Philosophy
GF0610_016
NB
REL
NORMAL
STANDBY ADF
LV
118.02
MEMORY−4
ALT:
MEMORY−1
110.00
ATC/TCAS ADF1
TCAS DSPY 1 HF1
COM1 NAV1
121.82 117.45
1200 1799.5
15423
15600
For radio parameters the RMU provides a local tune colour and a remote tune colour. Local tune is
performed on same RMU it is observed on. Remote tune is performed on another tuning source:
the other RMU or the FMS. Following local tune, the tuned item changes to the local tuned colour.
Item Local Tune Colour Example
VHF 1 and 2 White NAV Display Channel
Preset Data Cyan COM Preset Channel
Mode Data Green ADF Mode
FMS Data Magenta Nav Auto Annunciator
Following remote tune, the tuned item changes to yellow, with one exception − an FMS database
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Bombardier_Global_000-Communications(4)