曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

immediate response, regardless of the current format. The first momentary press of the TR/WX button selects terrain for
display at its default 10 nm range and PPOS format.
TUNE
The tune knob is a rotary control used for MFD radio tuning. The larger and smaller knobs change the most significant and
least significant digits of the frequency respectively. The up down arrow button in the center of the TUNE knob swaps the
recall and the active frequencies.
1/2 DME/H NAVSRC
RADIO BRGSRC
FRMT TFC TR/WX
REFS RADAR
TUNE MENU DATA TILT RANGE
CFO1101002_007
SUP
H
AUTO
TLIT
SUP
H
TCELES
FLIGHT INSTRUMENTS
Volume 2 Flight Crew Operating Manual Sep 13/2004
11-01-26 CSP 100-6 REV 1
DISPLAY CONTROL PANEL (DCP) (Cont)
RADIO
Pressing the RADIO button selects and deselects, on the MFD, the tuning control sub-menu of the radio associated with
the current position of the tuning control. Pressing the RADIO button when another menu is displayed closes the menu and
returns the tune box to its home position.
BRGSRC (BEARING SOURCE)
The BRG SRC button displays a menu of Bearing pointer sources on the PFD with the current Bearing pointer source highlighted.
The Menu knob and Data knob and Push Select are used to select and deselect the Bearing pointers.
MENU/DATA/PUSH SELECT
The MENU knob is a rotary control used to move a cyan selection box, to allow activation of various display items on the
PFD and MFD. The DATA knob is a rotary control used to change the value in the selection box.
The PUSH SELECT button located in the center of the MENU/DATA knob makes the value entered with DATA knob, the
active display value or change the state of the item in the selection box.
REFS (REFERENCE)
The selected V-speed references are displayed on the airspeed display. V1, VR, V2, VT, VGA, and VREF are initialized to
default values but deselected, which the pilot may change as required.
The REFS push button located on the DCP is used to select the desired reference menu. Repetitive pushes of the REFS
button toggle through the three pages of the REFS menu.
RADAR
The RADAR button selects and deselects the radar control menu on the PFD. The radar control menu provides mode,
ground clutter suppression, gain, sector scan, and target.
TILT-RANGE/PUSH AUTO TILT
The RANGE knob is a rotary knob with a function to control the decrease or increase of the PFD and MFD Nav display
range until the minimum or maximum range is reached.
The TILT knob is a rotary control to select the radar antenna tilt range (-15 to +15 degrees).
The PUSH AUTO TILT button located in the center of the RANGE/TILT knob selects and deselects automatic tilt control.
DISPLAY CONTROL PANEL WARNING FLAG
A display control panel (DCP) failure results in the display of an amber boxed DCP flag. This flag will appear on the PFD
and MFD displays.
FLIGHT INSTRUMENTS
Sep 13/2004 Flight Crew Operating Manual Volume 2
REV 1 CSP 100-6 11-01-27
REVERSION SWITCH PANEL
DESCRIPTION
The reversion switch panel provides an EFIS system capability for the selection of alternate sources of sensor data, radio
tuning, and the selection of reversionary PFD modes.
COMPONENTS AND OPERATION
The following is a brief description of the reversion switch panel switches:
LEFT DISPLAYS
The left display reversion switch is a three-position rotary switch, dedicated to enable the reversion of the left MFD/PFD
displays.
Position — PFD REV
L-PFD displays compressed format. L-MFD is shut down.
Position — NORM
L-PFD format is normal. L-MFD format is normal.
Position — MFD REV
L-PFD is shut down. L-MFD displays compressed PFD format.
TUNE
NORM CDU
ONLY
MFD
ONLY
COM 1
121.50
LEFT
DISPLAYS
NORM MFD
REV
PFD
REV
ATT/HDG
NORM
1 2
AIR DATA
NORM
1 2
RIGHT
DISPLAYS
NORM PFD
REV
MFD
REV CFO1101002_008
FLIGHT INSTRUMENTS
Volume 2 Flight Crew Operating Manual Sep 13/2004
11-01-28 CSP 100-6 REV 1
REVERSION SWITCH PANEL (Cont)
RIGHT DISPLAYS
The right display reversion switch is a three position rotary switch, dedicated to enable the reversion of the right MFD/PFD
displays.
Position — MFD REV
R-MFD displays compressed PFD format. R-PFD is shut down.
Position — NORM
R-MFD format is normal. R-PFD is normal.
Position — PFD REV
R-MFD is shut down. R-PFD displays compressed format.
ATTITUDE/HEADING
The attitude/heading reversion switch is a three-position rotary switch.
Position — 1.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Bombardier_Challenger_Global_00-Flight_Instruments(14)