28-22-06
ALL ú ú 10 Page 401 ú May 28/99
A
757
MAINTENANCE MANUAL
AUTOMATIC SUMPING JET PUMP
SEE A
INDUCED
TUBING 2. MOTIVE PORT
SEE B
MOTIVE TUBING
1. MOUNTING BRACKET
6. MOUNTING 10. INDUCED PORT
SCREW 4. WASHER
(EXAMPLE) SEE B
(EXAMPLE)
5. NUT 3. JET PUMP INBD (EXAMPLE) (AUTOMATIC SUMPING)
7. O-RING
FWD 8. RING
AUTOMATIC SUMPING JET PUMP
MOTIVE TUBING OR INDUCED TUBING
A
9. NUT
3. JET PUMP (AUTOMATIC SUMPING)
MOTIVE PORT OR INDUCED PORT B
Automatic Sumping Jet Pump
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-06
ALL ú ú 10 Page 402 ú May 28/99
A
757
MAINTENANCE MANUAL
(2) S 654-001Drain and purge the applicable fuel tank (AMM 28-11-00/201).
(3) S 014-003To remove the jet pumps in the main fuel tanks, remove the applicable main tank access door, 541AB or 641AB (AMM 28-11-01/401).
(4) S 014-015To remove the jet pumps in the center fuel tank, remove the center tank access door, 134AZ (AMM 28-11-02/401).
S 944-004
WARNING: OBEY THE FUEL TANK ENTRY PRECAUTIONS (AMM 28-11-00/201).
_______ FAILURE TO OBEY THE FUEL TANK ENTRY PRECAUTIONS COULD CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(5)
Obey the fuel tank entry precautions (AMM 28-11-00/201).
S 014-005
(6)
Go into the applicable fuel tank.
S 014-016
(7)
To remove the jet pumps in the center fuel tank, remove the baffle doors, 134BZ, 134CZ, and 134DZ (AMM 06-41-00/201).
S 034-017
(8)
Remove the nut (9), the ring (8), and the O-ring (7) from the jet pump (3) at the motive port (2) and the induced port (10) (View B).
S 034-018
(9)
Remove the mounting screws (6), washers (4), and nuts (5) from the jet pump (3) at the mounting bracket (1).
S 024-006
(10)
Remove the jet pump (3).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-06
ALL ú ú 02 Page 403 ú May 28/99
A
757 MAINTENANCE MANUAL
TASK 28-22-06-404-019
3. Install the Jet Pump (Fig. 401)
____________________
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 燃油 CHAPTER 28 - FUEL 3(66)
