曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Turbine Case Cooling
Fan air flows through valves and the manifolds to cool the HPT and LPT cases. The EEC controls the TCC air valve actuator as a function of altitude and N2.
During takeoff, climb, and cruise, the EEC sends signals to the torque motors in the TCC air valve actuator. Servo fuel pressure moves the HPT and LPT valves.
Engine External Accessories Cooling
Fan air continuously flows through accessory cooling tubes to specific engine components for cooling.
The nacelle zone ventilation shutoff valve controls the flow of fan air to cool the area outside of the HPC and the diffuser cases. The EEC controls the valve as function of altitude. Servo air pressure closes the valve.
EFFECTIVITY BEJ ALL  75-00-00 
Page 16 
D633W101-BEJ  Jan 05/2004 

PW4000 SERIES ENGINES

777 AIRCRAFT MAINTENANCE MANUAL

AIR -FUNCTIONAL DESCRIPTION

EFFECTIVITY BEJ ALL POST SB 777-71-0032  75-00-00 
Page 17 
D633W101-BEJ  Jan 05/2004 

PW4000 SERIES ENGINES

777 AIRCRAFT MAINTENANCE MANUAL

AIR -FUNCTIONAL DESCRIPTION

EFFECTIVITY BEJ ALL  75-00-00 
Page 18 
D633W101-BEJ  Sep 05/2003 

PW4000 SERIES ENGINES

777 AIRCRAFT MAINTENANCE MANUAL

THIS PAGE IS INTENTIONALLY LEFT BLANK

75-22-00

Page 1 D633W101-BEJ Sep 05/2002

AIR -COOLING -INTRODUCTION

Purpose
The cooling system supplies and controls the airflow for internal and external cooling. The cooling system has these subsystems:
*
Engine external accessories cooling

*
Engine bearing cooling

*
Turbine case cooling

*
Turbine vane and blade cooling.

EFFECTIVITY BEJ ALL  75-22-00 
Page 2 
D633W101-BEJ  Sep 05/2002 

PW4000 SERIES ENGINES

777 AIRCRAFT MAINTENANCE MANUAL

AIR -COOLING -INTRODUCTION

EFFECTIVITY BEJ ALL  75-22-00 
Page 3 
D633W101-BEJ  Sep 05/2002 

AIR -ENGINE BEARING COOLING -GENERAL DESCRIPTION

Purpose
The engine bearing cooling system pressurizes the bearing carbon seals and cools the No. 3 bearing compartment.
General Description
Compressor air pressurizes the main bearing carbon seals to make sure that the oil does not enter the air stream. Low pressure compressor (LPC) bleed air pressurizes the carbon seals around the No. 1 and 2 bearing. Ninth stage HPC bleed air pressurizes the No. 1.5 bearing carbon seal. LPC air also pressurizes the No. 4 bearing carbon seal.
The No. 3 bearing cooling system uses cooled 12th stage HPC bleed air to pressurize the No. 3 bearing carbon seals.
EFFECTIVITY BEJ ALL  75-22-00 
Page 4 
D633W101-BEJ  Sep 05/2002 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 發動機引氣 Engine Air PW 777 AIRCRAFT MAINTENANCE MANUAL(7)