CHAPTER 20
STANDARD PRACTICES - AIRFRAME
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
20-TITLE
Airframe
AMM
Intentionally left blank
20-TITLE
AMM
Airframe
TABLE OF CONTENTS
CHAPTER 20
STANDARD PRACTICES - AIRFRAME
1.
General ..............................................1
2.
Bolt and Nut Types Used in the Airplane .....................1
3.
Standard Torque Values .................................2
4.
Special Torque Values...................................3
5.
Torque Measurement....................................4
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
20-CONTENTS
Airframe
AMM
Intentionally left blank
20-CONTENTS
AMM
Airframe
CHAPTER 20
STANDARD PRACTICES - AIRFRAME
1. General
There are no maintenance practices which apply to the DA 40 airframe and its systems in general. This Chapter only has data about standard threaded fasteners.
Always tighten the nut or bolt to the torque shown in the tables below. Always use the correct locking device with the nut or bolt.
CAUTION: DISCARD SELF-LOCKING NUTS AFTER REMOVAL. THE FRICTION TORQUE REDUCES WITH USE.
2. Bolt and Nut Types Used in the Airplane
The DA 40 uses 3 types of standard bolts: DIN 931 and LN9037 metric specifications and AN3 through AN20 American specifications. You can identify the bolt type by the marking on the head and the surface treatment.
Bolt Type Marking on Head Surface Treatment
AN-Bolt
Corrosion resistant
Non-corrosion steel bolts have a dash
resistant steel Cadmium bolts have an X
DIN-Bolt
Manufacturer
Zink coated
Property class
The DA 40 uses these types of standard nuts: DIN 934, DIN 985, AN364, AN365, MS21042, MS21044.
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003
20-00-00
Airframe
AMM
'
'
3. Standard Torque Values
These tables show the correct torque values for bolts and nuts to AN and DIN specifications. Use the following torque values for all bolts, nuts and screws which meet the specifications unless they are in the list of special torque values below.
A. AN Fine Thread Series
Bolt Size Torque (Nm) Torque (ft.lb)
10 - 32 1.6 1.2
1/4 - 28 6.2 4.6
5/16 - 24 13.6 10
3/8 - 24 20.7 15.3
7/16 - 20 37.7 27.8
1/2 - 20 54.2 40
9/16 - 18 90.4 66.7
5/8 - 18 124.3 91.7
B. AN Coarse Thread Series
Bolt Size Torque (Nm) Torque (ft.lb)
10 - 24 1.6 1.2
1/4 - 20 5.7 4.2
5/16 - 18 10.2 7.5
3/8 - 16 20.9 15.4
7/16 - 14 28.9 21.3
1/2 - 13 54.2 40
9/16 - 12 79 58.3
5/8 - 11 101.6 75
Page 2 Doc # 6.02.01 09 Jan 2003 Rev. 4
20-00-00
AMM
Airframe
C. DIN and LN Specifications
Metric Thread Torque (Nm) Torque (ft.lb)
M4 1.8 1.3
M5 3.6 2.7
M6 6.4 4.7
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機維護手冊 DA 40 SERIES AMM 2(5)
