C.  
Prepare for the Check

 S 216-018
 (1)
Make sure the aileron trim indicator shows zero units of trim.

 S 486-002

 (2)  
Install the control wheel adapters on the captain's and the first officer's control wheels. Do this check:

 (a)  
Make sure the control wheel adapter touches the lower part of the control wheel.

 S 486-003
 (3)  
Install the protractor on the captain's (first officer's) control wheel.

 S 496-013

 (4)  
Install the control wheel lock assembly on the first officer's (captain's) control wheel.

 NOTE: Use the lock assembly to hold this control wheel at neutral
____
 during the check.

 D. Procedure

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-02
 ALL  ú ú 01 Page 601 ú Jun 20/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

CONTROL WHEELS
AND AILERON
DRUM ASSEMBLIES

SEE A
CONTROL WHEELS
AILERON TRIM INDICATOR
SEE B
CONTROL QUADRANT
BUS FORCE
LIMITER

SEE C
RVDT UNIT (2 LOCATIONS)
BODY CABLES
CONTROL WHEELS AND AILERON DRUM ASSEMBLIES
A
AILERON TRIM INDICATORB
Lateral Control Wheels and Aileron Control Drum Quadrant Assemblies Figure 601 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-02
 ALL  ú ú 01 Page 602 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
CAPTAIN'S

A
A
CLEVIS
BUS FORCE LIMITER
(VIEW IN AFT DIRECTION)

A-A

Lateral Control Wheels and Aileron Control Drum Quadrant Assemblies
Figure 601 (Sheet 2)

E40079
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-02
 ALL  ú ú 01 Page 603 ú Sep 20/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 S 866-005
 (1)
Apply a 2 pound force (0.2 Nm), in the up direction, at the right outer edge of the captain's (first officer's) control wheel.

 S 826-006

 (2)  
Set the control wheel protractor to zero.

 S 226-017

 (3)  
Apply a 2 pound force (0.2 Nm), in the down direction, at the right outer edge of the captain's (first officer's) control wheel. Do this check:

 (a)  
Make sure the control wheel does not move more than 2 degrees.

 NOTE: Measure from the protractor zero position.
____
 S 226-014
 (4)  
If the control wheel moves more than 2 degrees, examine these components for too much wear (Fig. 601):

 (a)  
The rod end, bolt, clevis, and bearing at the ends of the bus force limiter.

 (b)  
The plate assembly at the aileron control fork assembly.

 (c)  
The plate assembly for the control column at its connection to the torque tube.

 (d)  
The bevel gear set for the control column.

 (e)  
The plate assembly for the control column.

 E.
Put the Airplane Back to Its Usual Condition

 (1)  
Remove the control wheel lock assembly.

 (2)  
Remove the control wheel adapters and the protractor.

 S 096-015
 S 096-016
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-02
 ALL  ú ú 01 Page 604 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機(jī)維護(hù)手冊 飛行操縱 FLIGHT CONTROLS 1(84)