曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 (b) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows HI (High flow).
 (c) Make sure the visual position indicator on the left (right)
 pack FCV moves counterclockwise away from the temporary mark
 towards OPEN (High flow).
 S 715-273
 (2) ENGINE SPEED CARDS WITH A TEST JACK;
 ú  Disconnect the jumper test wire from the left (right) engine speed
 card and the airplane ground (engines off).
 (a) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows LO (Low flow).
 (b) Make sure the visual position indicator on the left (right)
 pack FCV moves clockwise to the temporary mark (Low flow).
 S 715-274
 (3) ENGINE SPEED CARDS WITH A TEST SWITCH;
 ú  Put the left (right) engine speed card switch back to the NORMAL
 position (engines off).
 (a) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows LO (Low flow).
 (b) Make sure the visual position indicator on the left (right)
 pack FCV moves clockwise to the temporary mark (Low flow).
 S 715-275
 (4) ENGINE SPEED CARDS WITH A TEST JACK;
 Connect the jumper test wire between the test point, J1, on the
 ú  front of the left (right) engine speed card and the airplane ground
 (engines on).
 (a) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows HI (High flow).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-00
 ALL  ú ú 13.1 Page 517 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 
MAINTENANCE MANUAL
 (b) Make sure the visual position indicator on the left (right)
 pack FCV moves couterclockwise away from the temporary mark
 towards OPEN (High flow).
 S 715-276
 (5)  ENGINE SPEED CARDS WITH A TEST SWITCH;
 ú  Put the left (right) engine speed card switch to the TEST position
 (engines on).
 (a) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows HI (High flow).
 (b) Make sure the visual position indicator on the left (right)
 pack FCV moves couterclockwise away from the temporary mark
 towards OPEN (High flow).
 ú
 ú  S 715-277
 ú  (6)  Turn the L (R) PACK selector, on the P5 panel, to the AUTO position.
 ú  (a) Make sure the L (R) PACK OFF light goes off.
 (b) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows LO (Low flow).
 (c) Make sure the visual position indicator on the left (right)
 pack FCV moves clockwise to the temporary mark (Low flow).
 S 715-278
 (7)  Push the L (R) RECIRC FAN switch-light to OFF.
 (a) Make sure the L (R) RECIRC FAN INOP light comes on.
 (b) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows HI (High flow).
 (c) Make sure the visual position indicator on the left (right)
 pack FCV moves couterclockwise away from the temporary mark
 towards OPEN (High flow).
 S 715-279
 (8)  Push the L (R) RECIRC FAN switch-light to ON.
 (a) Make sure the L (R) RECIRC FAN INOP light goes off.
 (b) Make sure the LEFT (RIGHT) ECS PACK H/L entry on the ANALOG
 DISCR page shows LO (Low flow).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 21-51-00
 ALL  ú ú 07.1 Page 518 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 
MAINTENANCE MANUAL
 (c) Make sure the visual position indicator on the left (right)
 pack FCV moves clockwise to the temporary mark (Low flow).
 S 715-616
 (9) Do the steps in the pack high flow inhibit test for the right pack.
 F.  Put the airplane back to its usual condition
 S 865-262
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 空調 AIR CONDITIONING 1(188)