曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 DO NOT TOUCH THE ENGINE OIL SYSTEM PARTS IF THE ENGINE IS HOT. THE OIL SYSTEM STAYS HOT FOR MORE TIME THAN THE OTHER ENGINE PARTS. YOU CAN INJURE YOURSELF IF YOU TOUCH A HOT OIL SYSTEM.
 CAUTION: DO NOT LET ALKALINE CLEANING FLUIDS TOUCH THE OIL WHICH WILL GO
_______ INTO THE ENGINE. VERY SMALL AMOUNTS OF ALKALINE CLEANING FLUIDS WILL DAMAGE THE ENGINE OIL.
 DO NOT LET ENGINE OIL TOUCH PARTS WHICH DO NOT NORMALLY TOUCH OIL. ENGINE OIL CAN DAMAGE RUBBER, PAINT, AND OTHER ENGINE PARTS.
 (4)
You must follow this WARNING and CAUTION for the entire task.Equipment

 (1)  
Pressure Fill Method With Rolls-Royce Equipment:

 (a)  
RR 3409536 - Oil replenishing gun

 (b)  
RR U999092 - Hose

 (c)  
RR UT954 - Pressure fill hose
 adapter/coupling assembly

 

 (2)  
Pressure Fill Method Without Rolls-Royce Equipment:

 (a)  Oil replenishing rig - specially made

 (3)  
Container - approximately 1 quart (1 liter) minimum capacity

 (4)  
Drain hose - with a connector which will connect with the oil tank overflow connector.

 (5)  
Combustible Gas Detector - Rolls-Royce 1018157

 (6)  
Draeger Hand Pump - Rolls-Royce 1013832 (Used with the Hydrocarbon 2 Tube)

 (7)  
Hydrocarbon 2 Tube - Rolls-Royce 1013833

 (Used with Draeger Hand Pump)Consumable Materials

 (1)
Oil - For RB211-535 Engines (AMM 20-30-04/201)Access

 (1)  
Location Zones 414 Left Engine Right Fan Cowl Panel 424 Right Engine Right Fan Cowl Panel

 (2)  
Access Panels 414BR Left Engine Oil Filler Access Door 424BR Right Engine Oil Filler Access Door

Prepare to Add the Engine Oil
 S 013-005
 (1)  Open the oil filler access door.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-13-01
 ALL  ú ú 01 Page 304 ú Mar 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 S 863-006
 (2)  Make sure that the engine has not operated during the last 10 minutes.
 F.  Use the Pressure Fill Method to Add the Engine Oil
 S 013-008
 (1)  
Remove the dust caps from the pressure fill and overflow connectors on the oil tank.

 S 493-009

 (2)  
Connect the drain hose to the oil tank overflow connector.

 S 493-010

 (3)  
Put the loose end of the drain hose in the container.

 S 613-011

 (4)  
Do these steps if you will use the RR equipment:

 (a)  
Assemble the replenishing gun, the hose and the pressure fill hose adapter/coupling assembly.

 (b)  
Remove the quick-disconnect (Q.D.) cover from the pressure fill hose adapter/coupling assembly.

 (c)  
Connect the pressure fill hose adapter/coupling to the oil tank pressure fill connector.

 (d)  
Install the oil container to the oil replenishing gun.

 (e)  
Use the oil replenishing gun to add the oil to the engine oil system. 1) Add oil until the oil level in the oil quantity sight glass

 shows FULL.

 (f)  
Disconnect the pressure fill hose adapter/coupling assembly from the pressure fill connector on the oil tank.

 

 S 613-012
 (5)  Do these steps if you will use the oil replenishing rig to add the oil:
 (a)  
Connect the oil replenishing rig to the pressure fill connector on the oil tank.

 (b)  
Use the oil replenishing rig to add oil to the oil system.

 1)  Add oil until the oil level in the oil tank oil quantity sight glass shows FULL.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 12-13-01
 ALL  ú ú 01 Page 305 ú Mar 20/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
 (c)  Disconnect the oil replenishing rig from the oil tank pressure fill connector on the oil tank.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 SERVICING 1(25)