(b)
On the Left Power Distribution Center, P414:
1) 414D16 ENG FUEL SW ON IND
S 835-126-N00
(2) For engine number 1, remove the DO-NOT-CLOSE tags and close these
circuit breakers:
(a) P6 Main Power Supply Panel
1) 6G1 FUEL SHUTOFF VALVE ENG 1
2) 6G19 STBY IGN ENG 1
3) 6J10 NACELLE ANTI-ICE 1
4) 6L10 FUEL CONT VALVE ENG 1
S 865-127-N00
(3) For engine number 2, remove the DO-NOT-CLOSE tags and close these
circuit breakers:
(a) P6 Main Power Supply Panel
1) 6G2 FUEL SHUTOFF VALVE ENG 2
2) 6G20 STBY IGN ENG 2
3) 6J11 NACELLE ANTI-ICE 2
4) 6L11 FUEL CONT VALVE ENG 2
S 865-128-N00
(4) For engine number 3, remove the DO-NOT-CLOSE tags and close these
circuit breakers:
(a) P6 Main Power Supply Panel
1) 6G3 FUEL SHUTOFF VALVE ENG 3
2) 6G21 STBY IGN ENG 3
3) 6J12 NACELLE ANTI-ICE 3
4) 6L12 FUEL CONT VALVE ENG 3
S 865-129-N00
(5) For engine number 4, remove the DO-NOT-CLOSE tags and close these
circuit breakers:
(a) P6 Main Power Supply Panel
1) 6G4 FUEL SHUTOFF VALVE ENG 4
2) 6G22 STBY IGN ENG 4
3) 6J13 NACELLE ANTI-ICE 4
4) 6L13 FUEL CONT VALVE ENG 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
74-00-00
ALL ú ú N02 Page 514 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 415-161-N00 WARNING: OBEY THE INSTRUCTIONS IN AMM 78-31-00/201 WHEN YOU CLOSE THE
_______ THRUST REVERSERS. IF YOU DO NOT OBEY THE INSTRUCTIONS, INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR.
(6)
Close the right thrust reverser (AMM 78-31-00/201). S 415-162-N00
(7)
Close the right core cowl panel (AMM 71-11-06/201). S 415-163-N00
(8)
Close the right fan cowl panel (AMM 71-11-04/201). S 445-164-N00
(9)
Do the activation procedure for the thrust reverser (AMM 78-31-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
74-00-00
ALL ú ú N02 Page 515 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
IGNITION EXCITER - REMOVAL/INSTALLATION
_______________________________________
1. General
_______
A. This procedure includes the tasks to remove and install the ignition exciter. The instructions apply to the upper and the lower ignition exciters.
B. There are two ignition exciters attached to a bracket on the top right side of the main gearbox. The upper ignition exciter (M7196) is for ignition system 1 and the lower ignition exciter (M7197) is for ignition system 2.
C. The access to the ignition exciter is through the right half of the thrust reverser. It is necessary to remove the exciter-to-igniter plug cable (cable) to remove or install the ignition exciter. The removal of the cable is necessary to get access to the ignition exciter and prevent damage to the ends of the cable.
TASK 74-11-01-004-001-N00
2. Ignition Exciter Removal (Fig. 401)
________________________
A. References
(1)
AMM 74-21-01/401, Exciter-to-Igniter Plug Cable
(2)
AIPC 74-11-01 Fig. 5, AIPC 74-21-01 Fig. 5
B. Access
(1)
Location Zone
412 Engine 1 - HPC 4 o'clock
422 Engine 2 - HPC 4 o'clock
432 Engine 3 - HPC 4 o'clock
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 點火 IGNITION(11)
