3)  To see the data with engineering units, push the LSK adjacent to the ENGR> prompt (if it is shown).
 S 862-048
 (3)  Do input monitoring on another location:
 NOTE: You can do input monitoring on a total of eight different
____ inputs to the EIU (port location E) at the same time, but you can do input monitoring on only one input to the CMC (port
___ location C) at a time.
 The steps that follow allow you to start input monitoring on each new location. The page indication in the top right corner for the first location is 1/8. The page indication for the last location is 8/8.
 When you do input monitoring of port location C, use only
____ page 1/8.
 (a)  
Push the <INPUT MONITORING LSK to show an empty INPUT MONITORING page on the CDU.

 (b)  
Use the CDU keyboard to put the port location, port number, word label, and SDI into the CDU scratchpad area.

 (c)  
Push the top left LSK to replace the adjacent symbols (-/---/---/---) with the location you put into the CDU scratchpad.

 TASK 45-10-00-862-050
 10. Configuration Data Page Display (Fig. 201, Fig. 210)
_______________________________
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 45-10-00
 ALL  ú ú 06 Page 238 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE/CMCS BITE MANUAL

Configuration
Figure 210 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 45-10-00
 ALL  ú ú 08 Page 239 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C20777
A
747-400 MAINTENANCE/CMCS BITE MANUAL

THE NUMBERS SHOWN ON THIS
DISPLAY ARE EXAMPLES ONLY.

Configuration
Figure 210 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 45-10-00
 ALL  ú
 ú  09  Page 240
 ú  Feb 18/02 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 A.
B.
C.
D.
A
747-400
MAINTENANCE/CMCS BITE MANUAL

General
 (1)  
The configuration function lets you look at the configuration of some LRUs. The data supplied includes the CMC option code and the CMC software part number.

Access

 (1)  
Location zones 221 Control Cabin, LH 222 Control Cabin, RH

Procedure
 S 862-051
 (1)  Show page 2 of the CMC MENU on the CDU:
 (a)  
Push the MENU key on the CDU to show the CDU MENU.

 (b)  
Push the <CMC LSK (line select key) to show the CMC MENU.

 (c)  
If the CMC MENU is not shown after you push the CMC LSK, push the <RETURN LSK until you see the CMC MENU.

 (d)  
Push the NEXT PAGE key to show page 2 of the CMC MENU.

 S 862-052
 (2)  Show the CONFIGURATION DATA page for an LRU:
 (a)  
Push the <CONFIGURATION LSK to show the systems that have CONFIGURATION DATA pages.

 (b)  
Push the LSK adjacent to a system prompt to show the LRUs that have CONFIGURATION DATA pages.

 (c)  
Push the LSK adjacent to an LRU prompt to see the CONFIGURATION

 DATA page for that LRU.Preparing to Change Options
 S 862-108
 (1)  
Make sure the captain's clock and the first officer's clock are set to the correct date and time (GMT |12 seconds).

 S 862-097

 (2)  
1 Show page 2 of the CMC MENU on the CDU:

 (a)  
Push the MENU key on the CDU to show the CDU MENU.

 (b)  
Push the line select key (LSK) adjacent to <CMC to show the CMC MENU.

 (c)  
Push the NEXT PAGE key to show page 2 of the CMC MENU.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 中央維護計算機系統(tǒng)(42)