-S332T304-16/-23/-26/-27/-30
-S360N021-201/-202
(a)
Make sure the vibration indication on panel P2 is zero.
(b)
Push and release the TEST button on the AVM signal conditioner.
1) If the AVM signal conditioner is blank, do the troubleshooting that shows for an AVM Indication Problem (AMM 71-00-54/101).
(c)
Make sure that the AVM signal conditioner shows 88 for 1-3 seconds, and then turns the display off. 1) If the display goes out of view, the AVM signal conditioner
passed the self test.
2) If 88 remains on, there is a failure of the AVM signal conditioner and it should be replaced. a) Do the self test again.
(d) If the AVM signal conditioner shows code A9, there is a failure of the AVM signal conditioner. 1) Replace the AVM signal conditioner and do the self test
again.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
77-31-00
ALL ú ú C05 Page 502 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 865-090-C00
(2) AVM SIGNAL CONDITIONER WITHOUT A DISPLAY ON THE FRONT PANEL; Do these steps to do a self-test of the AVM signal conditioner:
NOTE: AVMs with the part numbers that follow do not have a
____
display on the front panel:
-S360N021-100/-102
(a) Read the fault history of the AVM signal conditioner with the ARINC 429 reader (AMM 77-31-00/201).
NOTE: The self test of the AVM signal conditioner will
____ occur automatically when the electrical power is supplied.
1) If the AVM signal conditioner fails the self-test, a record of the failure will be made in the fault history as the last fault.
2) If the ARINC 429 reader shows 1, there is a failure of the AVM signal conditioner and it should be replaced.
S 865-091-C00
(3) AVM SIGNAL CONDITIONERS WITH A 24-DIGIT LED DISPLAY ON THE FRONT PANEL; Do these steps to do a self test of the AVM signal conditioner:
NOTE: AVMs with the part numbers that follow have a 24-digit
____
LED display on the front panel.
-S360N021-113/-114
-S360N021-213
(a)
Make sure the vibration indication on panel P2 is zero.
(b)
Push and release one of the four buttons on the front display of the AVM signal conditioner. 1) If the AVM signal conditioner is blank, do the
troubleshooting that shows for an AVM Indication Problem (AMM 71-00-54/101).
(c)
AIRPLANES WITH AN S360N021-213 AVM; The AVM signal conditioner will show SELF TEST?. 1) Push and release the YES button on the front display of the
AVM signal conditioner.
NOTE: All of the front display will illuminate for 1-3
____
seconds.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
77-31-00
ALL ú ú C01 Page 503 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
2) Make sure that the AVM signal conditioner shows SELFTEST PASSED.
NOTE: The AVM signal conditioner passed the self test.
____ The front display will then go out of view.
3) If the AVM signal conditioner shows SELFTEST FAILED REPLACE or is blank, there is a failure of the AVM signal conditioner. a) Replace the AVM signal conditioner and do the self test
again.
(d) AIRPLANES WITH AN S360N021-113 OR -114 AVM; The AVM signal conditioner will show Self Test?. 1) Push and release the YES button on the front display of the AVM signal conditioner. a) If the display on the AVM signal conditioner is blank, do the troubleshooting that shows for an AVM Indication Problem (AMM 71-00-54/101). 2) The AVM signal conditioner will show the hardware and software versions for 12 seconds, then show Test in progress for approximately two seconds.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 發動機指示 ENGINE INDICATIN(86)
