曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

NOTE:____Excessive white light will interfere with detection of a ú rejectable size indication. A test part having a known ú defect can be used to evaluate effectiveness of white light ú shielding. ú ú (2) Compressed Air Supply for drying parts. Air supply must have ú filters to remove oil and moisture which can contaminate parts or ú inspection materials. ú         ú
CAUTION:_______THE USE OF HIGH INTENSITY (125 WATT) ULTRAVIOLET BULBS WHICH ú EMIT AN EXCESS AMOUNT OF WHITE LIGHT WILL AFFECT THE ú SENSITIVITY OF THE FLUORESCENT PENETRANT PROCESS. USE ONLY ú BULBS CERTIFIED BY THE NDT ORIGINAL EQUIPMENT MANUFACTURER AS ú HAVING PASSED THEIR IN-HOUSE INSPECTION. IN ADDITION, THESE ú HIGH INTENSITY BULBS SHOULD BE PERIODICALLY TESTED FOR WHITE ú LIGHT EMISSION. ú ú (3) Ultraviolet Lamp to detect fluorescent indications. ú (a) The ultraviolet (black) light source used for the detection of ú indications shall have an intensity no less than 800 microwatts ú per square cm measured at a distance of 15 inches (380 mm). In ú addition, high intensity self filtered 125 watt bulbs shall be ú tested for white light emission to make sure that white light ú emission is in the permitted limits. ú (4) White Light Lamp for visual inspection of parts ú (5) Time piece for timing operations ú (6) 3-power and 10-power magnifying lenses ú (7) Assortment of adjustable mirrors ú (8) Gages to measure size of fluorescent indications ú (9) Cotton swabs or small fine hair art brush to apply solvent for ú evaluating questionable indications
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 70-40-01
 ALL  ú ú C02.1 Page 202 ú Jul 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
ú C. Consumable Materials ú         ú
NOTE: All materials are used at ambient temperature.
____ The materials
 ú  that follow may be used for this class of inspection.
 ú
 ú (1) Penetrant (Oil Soluble):
 ú  (a) ARDROX 985P12 (CP3004)
 ú  (b) BRITEMOR 555 (CP3405)
 ú  (c) FLURO-CHEK P21 (CP2150)
 ú  (d) MET-L-CHECK FP93A (CP3313)
 ú  (e) SHERWIN RC50 (CP3300)
 ú  (f) ZYGLO ZL2C (CP3107)
 ú (2) Hydrophilic Removers:
 ú
        ú
NOTE:____Hydrophilic remover concentration is 20% maximum unless
 ú  otherwise noted for the dip method. Hydrophilic remover
 ú  concentration is 5% maximum for the spray application method.
 ú
 ú  (a) ARDROX 9PR12 (10%) (CP3009)
 ú  (b) BRITEMOR H91A (CP3404)
 ú  (c) FLURO-CHEK E41 (CP2145)
 ú  (d) MET-L-CHECK E58D (10%) (CP3316)
 ú  (e) SHERWIN ER83A (10%) (CP3306)
 ú  (f) ZYGLO ZR10A (CP2137) or ZR10B (CP3105)
 ú (3) Dry Powder Developers:
 ú  (a) ARDROX 9D4A (CP3010)
 ú  (b) BRITEMOR PD3 (CP3401) or PD4 (CP3406)
 ú  (c) FLURO-CHEK DD2A (CP3203) or DD2B (CP3204)
 ú  (d) MET-L-CHECK D72A (CP3317)
 ú  (e) SHERWIN D90G (CP3307)
 ú  (f) ZYGLO ZP4A (CP3102)
 ú (4) Non-Aqueous Wet Developers:
 ú
        ú
NOTE:____Non-aqueous wet developers are approved for use in aerosol
 ú  spray only. Tracer-Tech solvent mixed developer D499C is
 ú  approved for bulk use with any penetrant system. A developer
 ú  from one manufacturer may be substituted for another
 ú  manufacturer's developer.
 ú
 ú  (a) ARDROX 9D1 (CP3008)
 ú  (b) FLURO-CHEK NAD-NF (CP2146)
 ú  (c) MET-L-CHECK D70 (CP3318)
 ú  (d) SHERWIN D100 (CP3308)
 ú  (e) ZYGLO ZP9F or E (CP3106)
 ú (5) Solvents:
 ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 STANDARD PRACTICES - ENGINE(56)