- do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, 4B on the rack connector
- compare the state of the aircraft identification-code pin-programming with the state given in the ASM (Ref. ASM 34-12/01).
(1) If the pin-programming is incorrect:
- repair the defective wiring of the rack connector
- install the ADIRU1 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin-programming is correct:
- install a new ADIRU1.
R **ON A/C 051-099, 106-149, 204-299, 301-399, 401-499,
A. If the test gives the maintenance message WRG: ACFT TYPE PIN PROG/ ADIRU1 (1FP1):
- remove the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001)
- do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, 4B on the rack connector
- compare the state of the aircraft identification-code pin-programming with the state given in the ASM (Ref. ASM 34-12/01).
(1) If the pin-programming is incorrect:
- repair the defective wiring of the rack connector
- install the ADIRU1 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin-programming is correct:
- install a new ADIRU1.
**ON A/C ALL
B. Do the test given in Para. 3.
Failure of the ADR2 Aircraft-Identification Pin-Programming
1. Possible Causes
_______________
- ADIRU-2 (1FP2)
- wiring of the rack connector
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-13-00-740-002 INTERFACE TEST of the ADR
ASM 34-12/02
3. Fault Confirmation
__________________
A. Test Do the Interface test of the ADR (system 2) (Ref. AMM TASK 34-13-00-740-002).
4. Fault Isolation
_______________
R **ON A/C 001-049, 101-105, 151-199, 201-203,
A. If the test gives the maintenance message WRG: ACFT IDENT PIN PROG:
- remove the ADIRU-2 (1FP2) (Ref. AMM TASK 34-12-34-000-001)
- do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, 4B on the rack connector
- compare the state of the aircraft identification-code pin-programming with the state given in the ASM (Ref. ASM 34-12/02).
(1) If the pin-programming is incorrect:
- repair the defective wiring of the rack connector
- install the ADIRU2 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin-programming is correct:
- install a new ADIRU2.
R **ON A/C 051-099, 106-149, 204-299, 301-399, 401-499,
A. If the test gives the maintenance message WRG: ACFT TYPE PIN PROG/ ADIRU2 (1FP2):
- remove the ADIRU-2 (1FP2) (Ref. AMM TASK 34-12-34-000-001)
- do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, 4B on the rack connector
- compare the state of the aircraft identification-code pin-programming with the state given in the ASM (Ref. ASM 34-12/02).
(1) If the pin-programming is incorrect:
- repair the defective wiring of the rack connector
- install the ADIRU2 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin-programming is correct:
- install a new ADIRU2.
**ON A/C ALL
B. Do the test given in Para. 3.
Failure of the ADR3 Aircraft-Identification Pin-Programming
1. Possible Causes
_______________
- ADIRU-3 (1FP3)
- wiring of the rack connector
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-13-00-740-002 INTERFACE TEST of the ADR
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 導航 NAVIGATION 1(111)
