(47HH, 57HH)
 AMM 21-61-34-400-001 Installation of the Pack Controller (7HH, 27HH)

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞21-61-00∞∞∞∞∞∞∞∞∞∞Page 277
 Aug 01/05 CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

AMM 21-61-34-400-002 Installation of the Air-Conditioning System
 Controller (47HH, 57HH) AMM 21-61-51-000-001 Removal of the Air-Inlet Flap Actuator 8HH and 28HH AMM 21-61-51-400-001 Installation of the Air-Inlet Flap Actuator 8HH and
 28HH AMM 21-61-52-000-001 Removal of the Air-Outlet Flap Actuator 9HH (29HH) AMM 21-61-52-400-001 Installation of the Air-Outlet Flap Actuator 9HH
 (29HH)
 AMM 21-61-53-000-001 Removal of the Bypass Valve 10HH (30HH)
 AMM 21-61-53-400-001 Installation of the Bypass Valve 10HH (30HH)
 ASM 21-51/01
 ASM 21-51/02
 ASM 21-61/02
 ASM 21-61/03
 ASM 21-61/04
 AWM 21-61-01
 AWM 21-61-02
 AWM 21-61-03
 AWM 21-61-04
 AWM 21-61-09

 3. Fault Confirmation
__________________
 **ON A/C 001-049, 051-061, 101-102, 201-202,
 A. Warning Confirmation
 NOTE : This Para. and the Paras. B, C and D which follow are work steps
____ necessary to confirm the nature (spurious or actual) of the ECAM warning AIR PACK1 REGUL FAULT.
 (1) On the panel 130VU push the MASTER CAUT pushbutton switch.
 B. Open this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU AIR COND/PACK TEMP/CTL SYS1/1/115VAC 1HH X22 122VU AIR COND/PACK TEMP CTL SYS2/1/115VAC 2HH Y18
 Aug 01/05R CES

 C. Close this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU AIR COND/PACK TEMP/CTL SYS1/1/115VAC 1HH X22 122VU AIR COND/PACK TEMP CTL SYS2/1/115VAC 2HH Y18
 D. Wait for a minimum of 60 seconds.
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 E. Test
 (1) Do a read out of the post flight report and do the operational test of the pack-temperature control system (Ref. AMM TASK 21-61-00-710-001).
 NOTE : If the test finds a fault the PC gives a fault code for shop
____ maintenance and also the related CFDS message(s) (refer to chapter 21-63-00 page block 301).
R **ON A/C 401-499,
 E. Test
 (1) Do a read out of the post flight report and do the operational test of the pack-temperature control system (Ref. AMM TASK 21-61-00-710-001).
 **ON A/C ALL
 4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 A. * If the post flight report gives the warning AIR PACK 1 REGUL FAULT without a maintenance message and,
 * no AIR PACK 1 REGUL FAULT warning shows on the ECAM upper DU and,

 * no maintenance message shows:

 - no further action is necessary. ** If the post flight report gives the warning AIR PACK 1 REGUL FAULT and, ** the ECAM upper DU shows the warning AIR PACK 1 REGUL FAULT or, *** If the post flight report gives the warning AIR PACK 1 REGUL FAULT with, *** the maintenance message NO DATA FROM P1 CONT and,
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞21-61-00∞∞∞∞∞∞∞∞∞∞Page 279
 Aug 01/05 CES *** the operational test of the pack-temperature control system gives the maintenance message NO TEST RECEPTION FROM P1 CONT:

 - do the work steps which follow.
 NOTE : Additional Information
____ For wiring and pin identification used in this procedure: (Ref. ASM 21-51/01), (Ref. ASM 21-61/02), (Ref. ASM 21-61/04) and, (Ref. AWM 21-61-09). For disconnection/reconnection of electrical connectors refer to the applicable work step AMM TASK reference in the applicable paras. 4. A, B, C and D.
R **ON A/C 401-499,
 A. * If the post flight report gives the warning AIR PACK 1 REGUL FAULT without a maintenance message and,
 * no AIR PACK 1 REGUL FAULT warning shows on the ECAM upper DU and,

 * no maintenance message shows:

 - no further action is necessary. ** If the post flight report gives the warning AIR PACK 1 REGUL FAULT and, ** the ECAM upper DU shows the warning AIR PACK 1 REGUL FAULT or:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 AIR CONDITIONING 空調2(39)