- the part number of the OFV which is installed in the aircraft.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞21-31-00∞∞∞∞∞∞∞∞∞∞Page 212
Aug 01/03R
CES
4. Fault Isolation
_______________
R
R A. Test Results
NOTE : This procedure is only applicable for:
____ - Outflow Valve Part Numbers 9023-15703-81 and previous.
(1) If one or both of the reports, LAST LEG REPORT, PREVIOUS LEG REPORT and/or the test gives the maintenance message,
- OUTFL.V FEEDB ASSY 1 (78):
- replace the VALVE-OUTFLOW (10HL), FEEDBACK ASSEMBLY (referred to as OFV (10HL)) (Ref. AMM TASK 21-31-51-000-005) and (Ref. AMM TASK 21-31-51-400-005).
(2) If the fault continues:
- replace the VALVE-OUTFLOW (10HL), ELECTRONIC MODULE 1 (Ref. AMM TASK 21-31-51-000-002) and (Ref. AMM TASK 21-31-51-400-002).
NOTE : The electronic module 1 is connected to the electrical
____
connector 10HL-A.
(3) If the fault continues:
- do a check and repair the wiring between the:
- OFV connector (10HL-D) pins A, B, C, D and E and the OFV connector (10HL-A) pins A, B, C, E and F,
- OFV connector (10HL-D) pin J and GND (Ref. ASM 21-31/01) and (Ref. ASM 21-31/03).
R B. Test Results
NOTE : This procedure is only applicable for:
____
- Outflow Valve Part Number 20790-01AA and onwards.
(1) If one or both of the reports, LAST LEG REPORT, PREVIOUS LEG REPORT and/or the test gives the maintenance message,
- OUTFL.V FEEDB ASSY 1 (78):
- replace the VALVE-OUTFLOW (10HL) (Ref. AMM TASK 21-31-51-000-001) and (Ref. AMM TASK 21-31-51-400-001).
(2) If the fault continues:
- do a check and repair the wiring between the:
- OFV connector (10HL-D) pins A, B, C, D and E and the OFV connector (10HL-A) pins A, B, C, E and F,
- OFV connector (10HL-D) pin J and GND (Ref. ASM 21-31/01) and (Ref.
ASM 21-31/03). R
R C. Do the test as given in the Para. 3.A.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞21-31-00∞∞∞∞∞∞∞∞∞∞Page 213
Aug 01/03 CES
TASK 21-31-00-810-806
Cabin Pressure Controller 2 Fault
1. Possible Causes
_______________
- CONTROLLER-CABIN PRESSURE 2 (12HL)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 21-31-00-710-002 Operational Test of the Pressure Control and
Monitoring AMM 21-31-34-000-001 Removal of the Cabin Pressure Controller (11HL,12HL) AMM 21-31-34-400-001 Installation of the Cabin Pressure Controller
(11HL,12HL)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the pressure control and monitoring system (Ref. AMM TASK 21-31-00-710-002).
4. Fault Isolation
_______________
A. If one or more of these reports, LAST LEG REPORT, PREVIOUS LEG REPORT and CLASS 3 REPORT and/or the test gives one of the maintenance messages which follow:
- PRESS CONTROLLER 2 (00) or,
- PRESS CONTROLLER 2 (01) or,
- PRESS CONTROLLER 2 (08) or,
- PRESS CONTROLLER 2 (12) or,
- PRESS CONTROLLER 2 (13) or,
- PRESS CONTROLLER 2 (18) or,
- PRESS CONTROLLER 2 (22) or,
- PRESS CONTROLLER 2 (36) or, 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 AIR CONDITIONING 空調1(94)
