(5)
 Put the aircraft back to the serviceable condition.

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 307 1 1 Aug 01/05 1 1 1CES 1

 TASK 31-51-00-610-002
 Delete OEB REMINDER information from FWCs using MCDUs.

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 31-51-00-610-001 Load OEB REMINDER information into FWCs using MCDUs. 31-51-00-610-003 Crossload OEB REMINDER information into FWCs using
 MCDUs. 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
 3. Job Set-up
__________ Subtask 31-51-00-860-053
 A. Aircraft Maintenance Configuration
 Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002)

 Subtask 31-51-00-010-051
 B. Get access to the Avionics Compartment
 (1)
 Put the access platform in position below the access door 824.

 (2)
 Open the access door 824.

R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 308 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-51-00-865-051

 C. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 49VU FWS/FWC1/SPLY 3WW F01 121VU CFDS/CFDIU/SPLY 2TW J18 121VU CFDS/CFDIU/BACK/UP 8TW J17 121VU AUTO FLT/MCDU/2 11CA2 N20 121VU EIS/FWC2/SPLY 2WW Q07
 Subtask 31-51-00-860-054
 D. Do the EIS start procedure
 (Ref. TASK 31-60-00-860-001)

 4. Procedure
_________
 Subtask 31-51-00-610-052
 A. Access to the ECAM OEB DATABASE UPDATE Menu
 NOTE : The procedure below is applicable to each MCDU. The actions and
____
 results of this procedure occur on the MCDU used.

 NOTE : If the response time of the FWCs is more than 1 second a IN
____
 PROGRESS message comes into view.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. Access to the ECAM OEB DATABASE UPDATE menu
 A. On one of the MCDUs , turn the  The MCDU is on.
 OFF/BRT knob

 B. Push the MCDU MENU mode key The MCDU MENU page comes into view.
 C. Push the line key adjacent to  The SYSTEM REPORT/TEST menu page comes the SYSTEM REPORT/TEST into view. indication.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 309 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
D. Push the line key adjacent to  The instruments menu page comes into the INST indication. view.
 E. Push the line key adjacent to  The ECAM first page comes into view. the ECAM indication.
 NOTE : For FWC1 database updating enter in the ECAM 1 menu. For FWC2
____
 database updating enter in the ECAM 2 menu.

 F. Push the line key adjacent to  The ECAM 1 or 2 OEB DATABASE page comes the OEB DATABASE indication. into view.
 NOTE : If the data base of the FWC1 or
____ FWC2 is not valid, the VERSION is replaced by XXX and the check sum is replaced by XXXXX adjacent to the FWC1 or FWC2 indication.
 NOTE : If the opposite FWC does not
____ respond, the NO RESPONSE message comes into view adjacent to the FWC1 or 2 indication.
 2. UPDATE CODE
 NOTE : The deletion of the FWC data base is possible only if the UPDATE CODE
____ is entered.
 A. With the MCDU keyboard, enter the TWIN code.
B. Push the line key adjacent to the UPDATE CODE indication.
The code TWIN comes into view in thescratchpad line.
If the code is valid, the ECAM 1 or 2OEB DATABASE UPDATE page comes into view.
 NOTE : If the code not valid, the
____ INVALID DATA message comes into view on the ECAM 1 or 2 OEB DATABASE page.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 310 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-51-00-610-053
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 指示/記錄系統 6(6)