SYMBOL
NAME
MODE
REMARKS
YK101 - YK104
Path deviation band MAP, Path deviation band is symmetric
(M) MAP CTR about the pointer and represents vertical RNP.
Position trend MAP, Predicts position at the end of 30,
vector (W) (dashed MAP CTR 60, and 90 second intervals. Each
line) segment represents 30 seconds. Based on bank angle and ground speed. Selected range determines the number of segments displayed. For range: . > 20 NM, 3 segments . = 20 NM, 2 segments . < = 10 NM, 1 segment.
ABCDE Active waypoint identifier (M) MAP, MAP CTR, PLN Indicates the active flight plan waypoint, the next waypoint on the route of flight.
124NM Active waypoint distance (W) MAP, MAP CTR, PLN Distance to the active waypoint.
0835.4z Active waypoint ETA (W) MAP, MAP CTR, PLN Indicates FMS–calculated ETA at the active waypoint.
AMBOY Waypoint: active (M), modified (W), inactive (C) MAP, MAP CTR, PLN Active– represents the waypoint the airplane is currently navigating to. Modified – represents the waypoints on the active route that are being modified. Inactive – represents the waypoints on the active route.
Copyright . The Boeing Company. See title page for details.
10.41.10 June 1, 2005
Flight Instruments, Displays -PFD/ND Navigation Displays 737 Flight Crew Operations Manual
SYMBOL NAME MODE REMARKS
MLF Off route waypoint (C) MAP, MAP CTR, PLN When the EFIS control panel WPT map switch is selected on, waypoints not on the selected route are displayed, for ranges of 5, 10, 20, or 40 NM.
PARBY KILMR AMBOY Flight plan route: active (M), modified (W), inactive (C), offset (M) MAP, MAP CTR, PLN The active route is displayed with a continuous line (M) between waypoints. Active route modifications are displayed with short dashes (W) between waypoints. Inactive routes are displayed with long dashes between waypoints. An offset route, selected through the FMC, is displayed with a dot–dash line (M) parallel to the active route.
12000 KILMR 0835Z Route data: active (M), inactive (W) MAP, MAP CTR, PLN When the EFIS control panel DATA switch is selected on, entered or procedural altitude and ETAs for route waypoints are displayed.
Holding pattern: MAP, A holding pattern appears when
active (M), MAP CTR, in the flight plan.
modified (W), inactive (C) PLN The holding pattern appears as a fixed size if the selected range is greater than 80 NM. A scaled representation of the holding pattern is displayed when the selected range is 80 NM or less and the airplane is within 3 minutes of the holding fix.
Altitude range arc MAP, Based on vertical speed and
(G) MAP CTR groundspeed, indicates the approximate map position where the MCP altitude will be reached.
Copyright . The Boeing Company. See title page for details.
June 1, 2005 10.41.11
Flight Instruments, Displays -PFD/ND Navigation Displays 737 Flight Crew Operations Manual
SYMBOL NAME MODE REMARKS
T/D Altitude profile point and identifier MAP, MAP CTR, Indicates the approximate map position of the FMC–calculated
T/C (G) PLN T/C (top–of–climb), T/D (top–
S/C of–descent), S/C (step climb),
E/D and E/D (end of descent) points. Indicates intermediate T/D points
T/D-XXXXX for level flight path segments during descent. Level flight path segment altitude is displayed.
DECEL Indicates the beginning of a deceleration segment resulting from deceleration to a holding pattern, a waypoint speed restriction or flaps up maneuvering speed. Indicates airport speed restriction deceleration point (no identifier).
Procedure turn: MAP, A procedure turn appears when in
active (M), MAP CTR, the flight plan.
modified (W), inactive (C) PLN The procedure turn appears as a fixed size if the selected range is greater than 80 NM. A scaled representation of the procedure turn is displayed when the selected range is 80 NM or less and the airplane is within 3 minutes of the procedure turn.
22L KABC Airport and runway (W) MAP, MAP CTR, PLN Displayed when selected as the origin or destination and selected range is 80, 160, 320, or 640 NM.
KTEB Airport (C) MAP, MAP CTR, PLN Displayed if the EFIS control panel ARPT map switch is selected on. Origin and destination airports are always displayed, regardless of map switch selection.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NG機組操作手冊Flight Crew Operations Manual FCOM 3(45)
