曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

• First push starts the chronometer,
• Second push stops the chronometer and freezes the display and the hand,
• Third push resets the display and hand to zero.
The elapsed time counter displays elapsed hours and minutes on a digital display. It is controlled by ET switch which has three
positions:
STOP: The chronometer is stopped.
RUN: The chronometer is running. Moving the switch to STOP and then to RUN doesn’t reset the chronometer.
RST: Resets the chronometer. This position is springloaded to STOP.
The Simulation rate switch allows toggling between 2x / 4x time comression and returning to normal time rate.
A319/320/321
Systems Manual
Phoenix Simulation Software P 88
REV 01 SEQ 001 Panel conguration utility
The PSS Aibus panel package contains a panel conguration utility which allows to customize some features of the panel, and to
create a keyboard shortcuts for any control simulated by the panel.
Startup tab
The two options dene the panel state when Airbus aircraft is loaded into Flight Simulator:
Start with Engines Off: The engines will be shut down upon panel load
Start with Cold and Dark cockpit: The engines will be shut down, power sources disconnected and cockpit controls set according
to total aircraft shutdown and securing. This allows to perform the entire aircraft startup procedure.
Panel Sound Volume tab
The slider controls the volume of sounds generated by the panel, as their volume cannot be set from Flight Simulator options.
Keyboard Assignments tab
Each control on the PSS Airbus panel can be assigned a keyboard shortcut.
The Command list displays all available panel functions. Selecting any entry in the list displays currently assigned keyboard
shortcut, if it is dened. If no shortcut is dened, the Key combo box shows NONE.
To assign a new shortcut, select a desired key and shift keys. Windows keyboard WIN and MENU keys can be used as shift keys.
After this, push the Assign button.
To clear a shortcut, push the Clear button.
A319/320/321
Systems Manual
Phoenix Simulation Software P 89
REV 01 SEQ 001 Panel conguration utility
MCDU Keyboard tab
The entry to the Multi-Purpose Control and Display Unit can be done from the computer keyboard. One of two methods can
be used for this.
First method is to hold down a shift key combination while typing the entry. This is the default method, and default shift key
combination is Ctrl and Win keys held down.
The second method is using the keyboard “Lock” keys. Any combination of NUM LOCK, SCROLL LOCK and CAPS LOCK can be
used. While the selected key(s) are in the “ON” state, all keyboard input goes to the MCDU.
When you use the selected combination of keys and the MCDU will accept the pushed keys, a blue “K” symbol ashes on
the MCDU. It indicates that all keyboard input will be intercepted by the MCDU, and you cannot control other Flight Simulator
functions with the keyboard.
Finishing the setting up
After all desired options are customized, the OK button saves the panel conguration and exits the utility. Pressing Cancel button
will reset all modications and exit the utility.
Pressing the Defaults button resets all settings to their default state and clears all added keyboard shortcuts.
The panel conguration is saved in “cong.pnl” le located in “PSS\Airbus A3xx” folder in Flight Simulation installation directory.

　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：PSS A319/A320/A321 Systems Manual 系統手冊(33)