曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Project Settings
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Discard new packets
All new captured packets will be discarded after being analyzed and will not be saved to the packet buffer.
Discard all old packets
Colasoft Capsa will empty the packet buffer and then append new packets to it.
Stop capture
Colasoft Capsa will stop capturing new packets.
Note: Don't choose this option if you would not like to cease capture.
Auto save packet file
If checked, Colasoft Capsa will automatically save packets to a single file or split files as you define.
Limit each packet to Input a value between 60 and 65535 to specify how many bytes are to be saved from the first
byte when program saving the packets into file form.
This is a useful feature for users who would like to send packets to technicians for analyzing but also want to keep
the detail information in the packets confidential.
Single file
All packets are saved to a same file.
File name
Specifies a name for the packet file. Click the button on the right to open a dialog for defining a save path for
the packet file.
Multiple files
Packets are saved to the files split by time or size. To reduce the total size, you may choose to only keep the most
recent files.
Save in folder
Specifies a folder name and the save path for all files. Click the button on the right to open a dialog for
defining a save path for the folder.
Base file name
The portion of a file name to the left of the period separator. Colasoft Capsa allows very long file names. Click the
button to view an example of the base file name.
Split file every
Chooses a rule for splitting the file if the file size is too big. You can split files by time or file size - months, days,
hours, minutes, KB, MB.
Keep all files
Saves all split files in the defined save path.
Keep most recent
Specifies the number of most recent files for saving.
Statistics Settings
You can save system resources if uncheck the following statistics options.
Enable detail protocol statistics of each endpoint.
If check this option (by default), you will not see detail protocol statistic information of endpoints (except root
nodes).
Enable detail statistics of packet size.
If uncheck this option (by default), you will not see the statistics of Most Common Packet Sizes in the Summary
view.
property of their respective owners. 50 / 50
Project Settings
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Enable detailed protocol statistics of each conversation
If check this option (by default), you will not see the detailed protocol statistics of each conversation in the
Conversations view.
Group IP address by its country
If uncheck this option (by default), the captured IP addresses will not be grouped under countries in the IP
Explorer group of the Project Explorer dock window.
Enable custom port
Check this option if you want Capsa to monitor non-standard ports, and then click the button to add ports.
Always show project settings when start capture
If checked, Colasoft Capsa will always open the Project Settings dialog every time when you start a new capture.
Project settings - adapter
Each time when you start a new capture, you are required to select the adapter. Available adapters are listed in
the Project Settings - Adapter page, you can choose one or more adapters (only one adapter can be opened in
the professional edition ) for the current project. When an adapter is highlighted, some brief descriptions about this
adapter will be showed on the lower Property pane. In this page you can also test the selected adapter. See
"Capture sources" for more references.
property of their respective owners. 51 / 51
Project Settings
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Test
To test a adapter you just need to select on adapter and click test at the right bottom, a dialog box will pop up and
show the test information.
property of their respective owners. 52 / 52
It is allowed to change adapter during the capture process, however, in order to keep the data displayed accurate
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料27(37)