曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

In addition to the common context commands as other tab views, this view also has the following special
commands:
Command Description
Decode Packet in New Window Opens a new window to show packet decode information; alternately,
you can double click on the packet.
Highlight Packet Highlights the current packet.
Packet Comment Adds, edits or deletes a comment for the current packet; the packet with
a comment is marked with .
Summary Shows the packet summary.
Automatic - show the uppermost protocol summary
Packet Capture
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are property of their respective owners. 36 / 36
IP Summary - show the packet summary of IP protocols; if no IP
protocols, show the uppermost protocol summary
TCP/UDP Summary - show the packet summary of TCP/UDP protocols;
if no TCP/UDP protocols, show the uppermost protocol summary
Export Packet... Exports selected packets to a file.
Send Packet Sends captured packets from defined NICs.
Set Relative Packet Sets the current packet as the relative packet.
Select Related Packets Selects and highlights the related packets by source, destination, source
and destination, protocol or port.
Hide Selected Packets Only shows the unselected packets.
Hide Unselected Packets Only shows the selected packets.
Unhide All Packets Shows all packets.
The columns in the Packets view offer many packet details. You can select more or less columns to show: right
click on the column heading bar and choose the More... command to open the Select Column dialog, check the
column headings you want to display.
If you only want to view those packets related to the current selection, you can first choose Select Related
Packets and a condition from the context menu, Colasoft Capsa will highlight all related packets; then right lick to
open the context menu again and select Hide Unselected Packets.
The table below lists the column headings available in the Packets view and the specific meaning they indicate.
Default Column Heading Description
* No. The packet number which is set automatically by
Colasoft Capsa.
* Absolute Time The actual time when the current packet is
transmitted.
* Source The IP address or physical address where the
current packet is transmitted from.
* Destination The IP address or physical address where the
current packet is transmitted to.
* Protocol The protocol used by the current packet in
transmission.
* Size The bytes of the current packet.
* Summary The summary for the current packet.
Date The date when the current packet is captured.
Delta Time The time span between the current packet and the
previous packet.
Relative Time
The time span between the current packet and the
relative packet (if no relative packet is defined, the
first packet is the relative packet).
IP Identifier The identification number of an IP packet.
Source Physical The physical address where the current packet is
transmitted from.
Destination Physical The physical address where the current packet is
transmitted to.
Source IP The IP address where the current packet is
transmitted from.
Destination IP The IP address where the current packet is
transmitted from.
Source Port The port number where the current packet is
transmitted from.
Destination Port The port number where the current packet is
transmitted to.
Comment The comment made for the current packet.
Packet Capture
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
You can rearrange the column heading bar by changing a column's position or width.
Packet decode
The packet decode view is a part of the Packets view, presenting the decode information of selected packet, you
can use the icon to show or hide it. Alternately, the packet decode information can be showed in the Packet
Decode window with double clicks on a packet row.
To show the Hex view, click the icon , which contains the actual packet contents in raw hexadecimal on the left
and its ASCII (or EBCDIC) equivalent on the right. The packet information in the packet decode view, Hex and
ASCII/EBCDIC view are consistent, when you select a section in one of these views, the corresponding portions
will be highlighted in the other views.
You may choose to show packet contents as ASCII or EBCDIC from the context menu by a right click in the Hex
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料27(32)