曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

same hub as your Internet gateway, or on your Internet gateway (if acceptable), thus you can monitor all network
traffic between your intranet and the Internet.
A list of some managed switches (with port monitoring/spanning) which are commonly used is available on our
website.
Configuring a switch
Colasoft Capsa should be installed on the host/server connected with the switch’s mirror port (span port).
Mirror port configuration:
Mirror the way out port to the management port (mirror port), in this way the entire data transmitted into/out of LAN
can be monitored.
Mirror all way out ports to the management port (mirror port), in this way not only the entire data transmitted
property of their respective owners. 10 / 10
Install and Uninstall
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are property of their respective owners. 11 / 11
into/out of LAN but also the communication among hosts in LAN can be monitored. (Recommend)
Note: Different brands' switches may apply different mirror port configurations, please refer to the instructions
coming with your switch.
The following are two examples for CISCO switch using the "monitor" command in configuration mode:
Format:
#monitor session number source interface mod_number/port_number
#monitor session number destination interface mod_number/port_number
Examples:
Mirror session 1: mirror port 1-10 to port 12
#monitor session 1 source interface 1/1-10
#monitor session 1 destination interface 1/12
Mirror session 2: mirror port 13-20 to port 24
#monitor session 2 source interface 2/13-20
#monitor session 2 destination interface 2/24
Change the corresponding parameters when there are multiple mirror sessions or modules.
Installing Colasoft Capsa
Before install Colasoft Capsa, please carefully read the system requirements and the ReadMe file that comes with
the program. To avoid possible incompatibilities, it is recommended that you uninstall any earlier or trial version of
Colasoft Capsa and close all running applications.
Installation Process:
When you launch the installation file, the first window you will see is the Welcome screen, telling you that Colasoft
Capsa will be installed on your machine.
Read the License Agreement carefully in the next screen to understand our terms and conditions concerning
possession and use of Colasoft Capsa. You must accept the terms of the license agreement to continue the
installation.
The next screen presents the important information from the ReadMe file.
The next Select Destination Location dialog suggests the default location in which to install Colasoft Capsa. Use
the browse button to designate an alternate installation location.
The next Select Components dialog for you to select install which build-in tool listed in this page.
Select a start menu folder in the next screen. Use the browse button to designate an alternate start menu folder.
Select Additional Tasks in the next screen.
Now you are ready to Install Colasoft Capsa on your machine. Click Install to start installation.
When installation is complete, the final setup complete screen is displayed. From this dialog, you may choose to
view the ReadMe file or launch the program.
Uninstall
To uninstall Colasoft Capsa and its components, select one of the following:
Choose Uninstall from Colasoft Capsa program group. Open the Control Panel window and double click the
Add/Remove programs icon, search the list for Colasoft Capsa and then remove it.
Getting Started
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Getting Started
After install Colasoft Capsa on your machine, there are a few more things to do before it can start capturing
packets. This chapter describes how to launch the program and make it available for packet capture.
Launching Colasoft Capsa
You can launch Colasoft Capsa using the following ways:
Launch from the setup wizard
Select Launch Colasoft Capsa 6.x when you finish setup to start the program immediately.
Launch from the desktop
Check the option Create a desktop icon in the setup wizard, an additional icon of Colasoft Capsa will be
placed on your desktop. To start the program, just double click on the icon.
Launch from the quick launch menu
Check the option Create a Quick Launch icon in the setup wizard, then you can start it from the quick launch
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料27(20)