曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

5.2.5.3.3.3 MSP packet type (MP). This field shall be set
to 1.
5.2.5.3.3.4 Supervisorypaaket (SP). This field shall be set
to 3.
5.2.5.3.3.5 Supervisory type (ST). This field shall be set
to 0.
5.2.5.3.3.9 Route /able (RT)
5.2.5.3.3.9.1 Contenr.~. This table shall consist of a
variable number of entries cach coillaining infoimation
specifying the addition or delclion ol' cntries in the I1 code-
DTE cross-reference table (5.2.8.1.1).
5.2.5.3.3.9.2 Entrtes. Each entry in the route table shall
consist of the 11 code, a list of up to 8 ground DTE addresses,
and a flag indicating whether the resulting I1 code-DTE pairs
shall bc added or deleted from the I1 code-DTE crossreference
table. A route table entry shall be coded as follows:
5.2.5.3.3.9.3 Interrogator ide,zc@er (I]). This field shall
contain the Cbit I1 code.
11:4
5.2.5.3.3.9.4 Add/delere Slug (AD). This field shall
indicale whether Lhc I1 code-DTE pairs shall be added
(AD = 1) or deleted (AD = 0) from the 11 code-DTE crossreference
table.
5.2.5.3.3.9.5 Nulnher of DTE addresses (ND). This field
shall be expressed in binary in the range from 0 to 7 and shall
indicate the number of DTE addresses present in DAL minus 1
(in order to allow from 1 to 8 DTE addresses).
AD: 1
5.2.5.3.3.9.6 DTE address list (DAL). This list shall
consist of up to Y DTE addresses, expressed in 8-bi~b inary
representation.
5.2.5.3.3.10 Optionul data length (ODL). This field shall
conlain lhe length in bytes of the following OD held.
ND:3
5.2.5.3.3.11 Optional duta (OD). This variable lcngth
field shall contain optional data.
DAL:v
5.2.5.3.3.6 Option Jag (OF). This field shall indicate L ~ E 5.2.5.3.4 MODE S CLEAR CONFIRMATION au AULP
presence of the optional data length (ODL) and optional data
(OD) fields. OF shall be set to 1 if ODL and OD are present. 5.2.5.3.4.1 Packet format. Thc I'ormal for this packet shall
Otherwise it shall be set to 0. be as follows:
5.2.5.3.3.7 htitialization bit (IN). This field shall indicate I D PMP:I ~ I ST:2 1 FILL2:O or 2
the resuiremcnt for subnetwork initialization. It shall be set bv -
the GDLP as specified in 5.2.8.1.2 d).
Note.- Initialization causes the clearing of any open SVCs
associuted with the DTE addresses contained in the ROUTE Fields shown in the packet forinat and not specified in the
pucker. Tlzis is needed to assrnre that all chunnels are closed at following paragraphs shall be set as specified in 5.2.5.2.1 and
acql~isirio~azn d .for initialization following recovery after u 5.2.5.2.5. This packet shall he processed as specified in
GDLP fail~lre. 5.2.6.3.
5.2.5.3.3.8 Route table le~igtlz (RrL). This field shall 5.2.5.3.4.2 Datu packet type (DP). This field shall be set
indicate the size of the routc table, expressed in bytes. to 0.
2811 1102
No. 71
Annex 10 - Aeronautical Telecommunications Volume 111
5.2.5.3.4.3 MSP packer iype (MP). This field shall be set
to 1.
5.2.5.3.4.4 Supervisotypncket (Sf). This field shall be set
to 1.
Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1. This
packet shall be processed as specified in Tablc 5-14.
5.2.5.3.4.5 Channel nurnher (CH): If a channel number
has been allocated during the call acceptance phase, then CH
shall be set to lhat value, otherwise it shall bc set to zero.
5.2.5.3.6.2 Data packet lype (DP). This field shall be set
5.2.5.3.4.6 Temporary channel (TC): If a channel number to 0.
has been allocated during the call acceptance phase, then TC
shall be set to zero, otherwise it shall be set to the value used
in the CALL REQUEST by GDLP.
5.2.5.3.6.3 MSP packet type (MP). This field shall be set
to 1.
5.2.5.3.4.7 Supervisory type (ST). This field shall be set
to 3.
5.2.5.3.6.4 Supervisory packet (Sf). This field shall be set
to 2.
5.2.5.3.5 MODE S CLEAR CONFIRMATION BY GDLP 5.2.5.3.6.5 Supervisory type (ST). This field shall be set
to 3.
5.2.5.3.5.1 Pucket format. The format for this packet shall
be as follows: 5.2.5.3.7 MODE S REJECT
5.2.5.3.7.1 Packet format. The format for this packet shall
be as follows:
Fields shown in the packet format and not specified in the
Collowing paragraphs shall be set as specified in 5.2.5.2.1 and
5.2.5.2.6. This packet shall be processed as specified in
5.2.6.3. Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1. This
5.2.5.3.5.2 Duto pucket type (DP). This field shall be set packet shall be processed as specified in 5.2.6.8.
lo 0.
5.2.5.3.7.2 Data packet type (DP). This field shall be set
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：附件10--航空電信an10_v3_1ed_amend_77(24)