曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

message is displayed for 6 seconds, during which time
all missiles on that side of the helicopter become “not
available” and are inhibited from firing.
The FCC has detected an alteration of internal values
affecting gun boresight harmonization. The gun will
function normally but without boresight corrections.
The missile system is functioning properly and the
weapons trigger has been pulled. This message is
displayed for 2 seconds.
Time of flight remaining in seconds to missile impact,
decrementing for autonomous launches. If more than
one missile is in flight, the display will show TOF for
the first launched missle, then subsequently launched
missiles.
4-52 Change 4
TM 1-1520-238-10
Table 4-18. High Action Display Weapons Status - continued
Crewmember Message Description
P/CPG FIRE . . . MISSILES The minimum launch separation time has elapsed in a
rapid fire missile engagement. The prompt is displayed
whenever more than one missile is present on the
priority channel after launch of a missile. This message
is displayed for 2 seconds.
P/CPG SIM LNCH Displayed if training missiles are being used in place of
MSL LNCH. This message is displayed for 2 seconds.
P/CPG
P/CPG
RF ORIDE
2 CHANLS...TRACKING
Growth position for RF/IR missile seekers.
Missiles selected on each channel have locked onto and
are tracking laser energy of two different codes.
P/CPG PRI CHAN...TRACKING Missiles selected on the priority channel have locked
onto and are tracking laser energy.
P/CPG ALT CHAN...TRACKING Missiles selected on the alternate channel have locked
onto and are tracking laser energy.
If no channels are tracking, the weapon status section
will display the delivery mode and the firing delivery
messages which are “HI“, “LO”, “DIR”, or “LOBL”. The
fire delivery messages are “NORM”, “STBY”, “MANL”,
or “RIPL” (i.e., “LOBL NORM”).
P/CPG LASE 1 . . . TARGET
LASE 2 . . . TARGET
LASE 3 . . . TARGET
LASE 4 . . . TARGET
THRU
LASE 16 . . . TARGET
The laser designator must be lasing the target for
missile terminal guidance. This message is displayed
during the last 8 seconds of the calculated missile time
of flight in place of the TOF-TT message.
P/CPG MSL SEL? Missiles have been actioned, but no missiles have been
selected.
P/CPG ZONE? Rockets have been actioned, but no zone has been
selected for firing.
P/CPG SIGHT? A weapon system has been actioned but the SIGHT SEL
switch is in STBY.
P/CPG
P
PYLNBST?
HSI CUE
The FCC has detected an alteration of internal values
affecting pylon boresight harmonization. The pylons,
rockets and missile subsystems will function normally
but without pylon boresight corrections.
DNS FLY-TO data validation (wrap) error
Change 4 4-53
TM 1-1520-238-10
Table 4-19. High Action Display Opposite Crew Station Weapon Control
Crewmember Message Description
P
P
P
CPG
CPG
CPG
CGUN
CRKT
CMSL
PGUN
PRKT
PMSL
The CPG has actioned the area weapon system.
CPG has actioned the rocket system.
CPG has actioned the missile system.
Pilot has actioned the area weapon system.
Pilot has actioned the rocket system.
Pilot has actioned the missile system.
4.29 ALPHA/NUMERIC DISPLAY (AND). Figure 4-19. In the event of an AND failure, the Alpha/
Numeric Display information may be symbolically du-
The AND provides information to the CPG for use in plicated on the TADS displays by placing the DEK
the operation of the mission equipment. The AND is lo- rotary switch in the SP1 position and keying-in an ‘I”.
cated below the heads-down-display in the ORT. The The AND information will then be duplicated on the sedisplay
is continuously visible to the CPG whenever he lected TADS display in the same orientation as on the
views heads down. The display fields are outlined in AND. Table 4-20 lists the message and visual location.
Figure 4-19. Alpha/Numeric Display (AND)
Table 4-20. Alpha/Numeric Display Message Location and Description
Message Description
SIGHT STATUS SECTION
RECORDER
RCDR ON
RCDRFAIL
RCDR OFF
NON TADS
TADS FAIL
TV FAIL
FLIR FAIL
IRISFAIL
TADS...BORESITE
4-54 Change 4
The ORT VID RCD switch has been pressed and the video recorder is recording.
The ORT VID RCD switch has been pressed and the video recorder is recording.
The ORT VID RCD switch has been pressed and the video recorder has
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：阿帕奇攻擊直升機操作手冊2(11)