曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

MECHANICS / ELECTRICS & AVIONICS COURSE 33 LIGHTS
UF94200
EFFECTIVITY Page 42
ALL
33 - LIGHTS
33-20-00 CABIN LIGHTS - CONTROLS
PRESENTATION
CONTENTS:
General
MAIN ON/MAIN OFF Pushbuttons
ENTRY Pushbuttons
WINDOW and CEILING Pushbuttons
LAVatory Pushbutton
Cabin ATTendant Pushbutton
READ Pushbutton
Self Examination
TMULIG301 LEVEL 1
EFFECTIVITY 33-20-00 Page 1
Jun 30/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 33 LIGHTS
UF94200
EFFECTIVITY Page 43
ALL
CABIN LIGHTS - CONTROLS PRESENTATION
GENERAL
The Cabin Lights Controls control the lighting of the
Cabin, Entry Areas, Lavatories, Cabin Attendant work
and Passenger Reading lights.
The Cabin Lights Controls are located on the FORWARD
ATTENDANT PANEL(FAP), part of the CABIN
INTERCOMMUNICATION DATA SYSTEM(CIDS).
The number of pushbuttons and their position on the
Forward Attendant Panel (FAP) depend on the airline’s
choice.
MAIN ON/MAIN OFF PUSHBUTTONS
When the MAIN ON pushbutton is pressed, the FAP front
face illuminates, the ENTRY and CABIN BRIGHT(BRT) and
WDO and CLG integral lights come on green and the CABIN
and ENTRY AREAS Lighting come on at FULL BRIGHTNESS:
NOTE: At CIDS power-up, the FAP front face illuminates
and the Cabin and Entry Areas automatically come
on at FULL BRIGHTNESS, with the associated
controls illuminated.
When the MAIN OFF pushbutton is pressed, the FAP front
face, the Cabin and Entry Areas lighting are switched
off.
The MAIN OFF pushbutton also allows the LAVatory
Lighting and the Cabin ATTendant and Passenger READing
Lights to be switched off.
ENTRY PUSHBUTTONS
The ENTRY Areas Lighting (FWD/AFT) is controlled by
the BRIGHT (BRT), DIM1 and DIM2 pushbuttons.
When the BRT, DIM1 or DIM2 pushbutton is pressed, the
integral light comes on green and the associated ENTRY
Area comes on at FULL (100%), 50% or 10% brightness.
Pressing the BRT, DIM1 or DIM2 pushbutton a second
time, switches off the associated integral light and
the corresponding ENTRY Area Lighting.
NOTES: - At CIDS power-up, the ENTRY Areas come on at
FULL BRIGHTNESS (BRT) with the associated
integral light on.
- When the Engines are running and the Cockpit
Door is open, the FWD LEFT ENTRY Area Lighting
automatically switches to DIM2 brightness.
- With the MAIN OFF pushbutton previously
selected, the ENTRY Areas can be directly
switched on by selecting the associated BRT,
DIM1 or DIM2 pushbuttons, without first
pressing the MAIN ON pushbutton.
TMULIG301-T01 LEVEL 1
EFFECTIVITY 33-20-00 Page 2
Jun 30/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 33 LIGHTS
UF94200
EFFECTIVITY Page 44
ALL
CABIN LIGHTS - CONTROLS PRESENTATION
TMULIG301-P01 LEVEL 1
EFFECTIVITY 33-20-00 Page 3
Jun 30/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 33 LIGHTS
UF94200
EFFECTIVITY Page 45
ALL
CABIN LIGHTS - CONTROLS PRESENTATION
WINDOW and CEILING PUSHBUTTONS
The WINDOW(WDO) and CEILING(CLG) Lighting is
controlled by the BRIGHT(BRT), DIM1 or DIM2
pushbuttons.
When the BRT, DIM1 or DIM2 pushbutton is pressed, the
dedicated integral light and the integral light of the
WINDOW(WDO) and CEILING(CLG) pushbuttons come on green
and the associated WINDOW and CEILING Lighting is
switched on at FULL(100%), 50% or 10% brightness.
Pressing the BRT, DIM1 or DIM2 pushbutton a second
time, switches off the associated WINDOW and CEILING
Lighting.
The integral lights of the WINDOW, CEILING and
associated pushbutton go off.
NOTES: At CIDS power-up, the WINDOW and CEILING
Lighting comes on at FULL BRIGHTNESS (BRT) with
the associated integral light on.
- With the MAIN OFF pushbutton previously
selected, you cannot directly switch on the
WINDOW and CEILING Lighting by pressing the WDO
and CLG pushbuttons: The associated BRT, DIM1
or DIM2 must be pressed first.
LAVATORY PUSHBUTTON
At Power-Up or when the MAIN ON pushbutton is pressed,
the LAVATORIES are not illuminated.
The LAVatory pushbutton allows the LAVATORY Lighting
to be controlled: When the LAVatory pushbutton is
pressed on, the integral light comes on green and the
Lighting of all the Lavatories comes on at 50%
brightness, with the LAVATORY DOOR open or closed.
If the LAVATORY DOOR is locked, the LAVATORY Lighting
comes on at FULL brightness (100%).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：ATA 33 LIGHTS(6)