曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

                          ~- W,osy = ~Vdd~
                                                 g
The kinematic equations are
                                                      x -. V cos y
                                       h : V siny
Equation (2.127) can be expressed as
(2.127)
(2.128)
(2.129)
(2.130)
T-D       ldV
  W   -siny == --                   (2.131)
              g dt
Multiply both sides of Eq. (2.131) by  V  to obtain
                                         V ( TW D) _  V sin y = 21g (dc~.)                        (2.132)
Define
                                           he = h + ~rg                               (2.133)
where he is called the energy height. Using Eqs. (2.130) and (2.132), we obtain
                                            d;- = V (TW D)                               (2.134)
                                                                                (
or
                                     ll;t = Ps                           (2.135)
                  dt
Thus, the specific excess-power is more realistically equal to energy rate of climb
rather than the kinematic rate of climb dh/dt as assumed for steady-state climb.
The time to climb from a given initial energy height he, to a given final energy
height hef is given by
    hef dhe
t -                                   (2.136)
   -ei PS
T
I
Z
AIRCRAFT PERFORMANCE
E
E
s=o
hs
h r*
h3
h2
hi
                       v
Fig.2.18   Specific excess power curves at various altitudes.
101
      To evaluate the integralin Eq. (2.136), we need to draw the Ps  curves at var:ious
altitudes. The procedure of drawing Ps curves is as follows:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：動力機械和機身手冊1(59)