曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(a) include a brief description of the type of maintenance carried out; and
(b) be signed by the person making the certification; and
(c) include the licence number, airworthiness authority number or certificate of
approval number of the person making the certification; and
(d) set out the time in service of the aircraft since new; and
(e) if the person making the certification is an employee—state the name of the
person’s employer and the employer’s certificate of approval number,
licence number or airworthiness authority number; and
(f) set out details of the approved maintenance data used to carry out the
maintenance; and
(g) if an exemption from or variation to a requirement is in force under
regulation 42ZS in relation to the aircraft—set out details of the exemption
or variation; and
(h) if, in the course of carrying out the maintenance, the weight or balance of the
aircraft has been varied—include a record of the variation; and
(j) if a special inspection was carried out—set out what was found as a result of
the inspection; and
(k) if, in the course of carrying out the maintenance, an inspection using a
nondestructive testing method was carried out—set out:
(i) the non-destructive testing method used in carrying out the
inspection; and
(ii) the procedure used in carrying out the inspection; and
(iii) what was found as a result of the inspection; and
(l) include a list of airworthiness directives complied with in the course of
carrying out the maintenance and a statement setting out any defects found
in complying with those directives; and
(m) if, in the course of carrying out the maintenance, an aircraft component:
(i) that has had maintenance carried out on it; and
(ii) that was supplied to the person carrying out the maintenance by
another person;
was fitted—set out the number of the document that covered the supply of
the component in accordance with subregulation 42W (4); and
(n) if, in the course of carrying out the maintenance, a time-lifed aircraft
component was fitted or replaced:
Scheds — 28 Civil Aviation Regulations 1988
Legal Services Group Amended CAR – 2nd Ed
Civil Aviation Safety Authority August 2003
(i) identify the component and that includes (if applicable) the part
number and serial number of the component; and
(ii) list the airworthiness directives that have been complied with in
relation to the component; and
(iii) if the component was supplied to the person carrying out the
maintenance by another person—set out the number of the document
that covered the supply of the component in accordance with
subregulation 42W (4); and
(iv) if the component has not been overhauled—set out the time in
service of, or the number of cycles completed by, the component
since new; and
(v) if the component has been overhauled—set out the time in service of,
or number of cycles completed by, the component since its most
recent overhaul;
(vi) if the component is an engine—set out the test performance figures
of the engine; and
(p) if, in the course of carrying out the maintenance, an aircraft material:
(i) that has had maintenance carried out on it; and
(ii) that was supplied to the person by another person; and
(iii) that is not a fluid;
was used—set out the number of the document that covered the supply of
the material in accordance with subregulation 42X (1); and
(q) identify the documents kept by the person carrying out the maintenance as a
record of the carrying out of the maintenance; and
(s) include the date on which the certification was made.
4.5 If certifications for completion of stages of maintenance are made in the aircraft
log book or approved alternative document for the aircraft, a final certification
must:
(b) be signed by the person making the certification; and
(c) include the licence number, airworthiness authority number or certificate of
approval number of the person making the certification; and
(d) if the person making the certification is an employee—state the name of the
person’s employer and the employer’s certificate of approval number,
licence number or airworthiness authority number; and
(e) include the date on which the certification was made.
What is the responsibility of a person who makes a final certification?
4.6 A person must not make a final certification unless the person is satisfied that:
(a) all maintenance required to be carried out on the aircraft has been carried
out; and
(b) if the maintenance was required to be co-ordinated by paragraph 3.1 or
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：澳大利亞Civil_Aviation_Regulations下(86)