曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Page 54
D633A101-SHZ1 Oct 10/2002
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
General
FMCS hardware program pin options are set with the FMC
program switch modules. The program pins customize the
FMCS to your airline configuration.
NOTE: Program pin status can be verified on the FMCS BITE
analog discretes pages and model engine
configuration pages on the CDU.
Options
These are your FMCS options:
* Airplane model MT_737-700
* Thrust rating 22,000
* Standard brakes
* Engine single combustor
* Performance code 1
* Source/Destination Identifier
* Single FMC
* Takeoff speeds
* Runway position update on TOGA
* Takeoff profile
* Weight in kilograms
* Degrees C default
* Selected course radial shown on the navigation display
* Flight number entry
* ACARS installed
* SELECT CONFIG Mode.
Configuration Options
The airframe/engine configuration is found by a combination of
eight program pins. This combination sets these conditions:
* Airplane model
* Engine thrust
* Engine combustor type
* Brake type.
The next generation 737 program pin determines that the aero/
propulsion data is stored in the model engine data base
(MEDB).
The airframe/engine parity pin determines that the airframe/
engine configuration is valid. Odd parity is used.
The performance option code defines levels of reduced climb
thrust so that climb thrust can not be more than take off thrust.
The source/destination identifier identifies the FMC as left or
right. It is always set to left.
Computation Options
The takeoff speeds option together with the certified QRH
takeoff data software option enables the FMC to calculate
values of V1, VR, and V2 based on the certified QRH takeoff
data.
FMCS - PROGRAM PIN INTERFACE
EFFECTIVITY
SHZ ALL 34-61-00
Page 55
D633A101-SHZ1 Jun 10/2004
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-016
The runway position update on TOGA option enables the FMC
to update the FMC position to the present runway position when
the TOGA switch is pushed.
The takeoff profile option lets the FMC control the altitude at
which thrust is decreased from T/O thrust to climb thrust.
Display Options
The kilogram weight option sets the weight default for CDU
entries.
The degrees C default option sets the temperature default for
CDU entries.
The selected course option displays the selected course radials
for manually tuned navaids on the navigation display.
Interface Options
The flight number entry option lets the crew enter flight number
which shows on the PROGRESS pages.
The ACARS installed option enables the interface between the
MCDU and the ACARS management unit.
The SEL CONFIG mode option is used to see the configuration
data for the loadable software of a non FMC system.
FMCS - PROGRAM PIN INTERFACE
EFFECTIVITY
SHZ ALL 34-61-00
Page 56
D633A101-SHZ1 Jun 10/2004
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-016
FMCS - PROGRAM PIN INTERFACE
FMCS - PROGRAM PIN INTERFACE
EFFECTIVITY
SHZ ALL 34-61-00
Page 57
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-016
Printer Receptacle
You can connect a portable printer to the BITE printer
receptable connector on the P-18 panel. When the printer is
connected, you can print CDU and FMC data.
The printer is supplied by the customer.
Portable CDU Receptacle
You can connect a portable CDU to the portable CDU receptable
connector in the main electronic equipment compartment. With
the CDU connected, you can do maintenance BITE in the
electronic equipment compartment.
The portable CDU is supplied by the customer.
NOTE: Data will still show on CDU 1 while the portable CDU is
connected.
FMCS - BITE PRINTER AND PORTABLE CDU RECEPTACLES
EFFECTIVITY
SHZ ALL 34-61-00
Page 58
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-053
FMCS - BITE PRINTER AND PORTABLE CDU RECEPTACLES
FMCS - BITE PRINTER AND PORTABLE CDU RECEPTACLES
EFFECTIVITY
SHZ ALL 34-61-00
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM3(116)