(1)
The maximum takeo. weights must be established as the weights at which compliance is shown with the applicable provisions of this part (including the takeo. climb provisions of Sec. 25.121(a) through (c), for altitudes and ambient temperatures.
(2)
The maximum landing weights must be established as the weights at which compliance is shown with the applicable provisions of this part (including the landing and approach climb provisions of Sec. 25.119 and 25.121(d) for altitudes and ambient temperatures).
(3)
[The minimum takeo. distances must be establishedas the distances at which complianceis shown with the applicableprovisionsof thispart(including the provisions ofSec.25.109and25.113,for weights, altitudes, temperatures, wind components, runway surface conditions(dry and wet), and runwaygradients) for smooth, hard-surfaced runways. Additionally, at the option of the appli-cant, wet runwaytakeo.distances maybe establishedfor runway surfacesthat havebeengroovedor treated with aporousfriction course, and maybe appro-ved for use on runways where such surfaces have been designed, constructed, and maintained in a manner acceptable to the Administrator.]
(b)
The extremesfor variablefactors(such as altitude,temperature, wind, and runway gradients)are those at which compliance with the applicableprovisions of thispart is shown.
Amdt. 25-92, E.. 3/20/98
50.2 Markings and Placards
FAR 25.1541 : General.
(a) The airplane must contain–
(1)
The speci.ed markings and placards; and
(2)
Any additional information, instrument markings, and placards required for the safe operation if there are unusual design, operating, or handling charac-teristics.
(b) Each marking andplacardprescribedinparagraph(a) ofthis section–
(1)
Mustbedisplayedin a conspicuousplace; and
(2)
May not be easily erased, dis.gured, or obscured.
FAR 25.1543 : Instrument markings : general.
For each instrument–
(a)
When markings are on the cover glass of the instrument, there must be means to maintain the correct alignment of the glass cover with the face of the dial; and
(b)
[Each instrument markingmust be clearly visible to the appropriate crewmember.] Amdt. 25-72, E.. 8/20/90
FAR 25.1545 : Airspeed limitation information.
The airspeed limitations required by Sec. 25.1583(a) must be easily read and unders-tood by the .ight crew.
FAR 25.1547 : Magnetic direction indicator.
(a)
Aplacard meeting the requirements of this section must be installed on, or near, the magnetic direction indicator.
(b)
The placard must show the calibration of the instrument in level .ight with the engines operating.
(c)
Theplacard must state whetherthe calibrationwasmade with radioreceiverson or o..
(d)
Each calibration reading must be in terms of magnetic heading in not more than 45 degree increments.
FAR 25.1549 : Powerplant [and auxiliary power unit instruments.]
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：FAA規(guī)章 美國聯(lián)邦航空規(guī)章 Federal Aviation Regulations 4(39)
