Fig. 38-5  EADI  F/D and FMA

On the left side of EADI, an airspeed tape moves against a fixed pointer. An arrow points up or down to indicate that the airplane's speed is increasing or decreasing. The target speed is supplied by the MCP to the EADI symbol generator. This target is the MCP selected speed or the FMC target speed in VNAV. It is represented as a magenta index. If the target speed is off scale, the selected speed appears as a three digit number above or below the speed tape, depending upon current speed relative to the target speed.
READING  MAERIAL
QUESTIONS TO LESSON 38 READING MATERIAL
1. What are installed in the throttle lever handles?
2. Where is a pushbutton exposed on to actuate the switch?
3. Where are the A/P disconnect switches located in ?
4. Where are the TO/GA switches installed on ?
5. what switch is located on the control stand?
6. where is the yaw damper switch located on ?
7. What is located on the forward electronics panel P9 ?
8. How are the A/T disengage switches operated ?
9. Why are the A/T disengage switches wired in series ?
10. How to disconnect either autopilot ?
11. When do the red A/P warn lights extinguish ?

EXERCISE
A. Find out the explanations of the following words in your "English-chinese technical dictionary"
1. placard                          [P1-114]
2. reduced thrust                    [P1-123]
3. maintenance                      [P1-97]
4. flag                             [P1-60]
5. VMO                            [P1-166]
6. MMO                           [P1-102]
7. annunciator                       [P1-11]

B. Translate lst and 3rd paragraphs of lesson 38 into chinese.
C. Explain the following abbreviations and acronyms.
  1. CWS
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：第31課 大氣數據系統 LESSON 31 AIR DATA SYSTEM(38)