曝光臺(tái) 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

Cruise flight levels were assumed to be constant between the end of the climb phase (departure phase) and the beginning of the descent phase (arrival phase). Using the combination of these three graphs, a flight level and a speed can be allocated to a waypoint along the trajectory between a city-pair based on the Great Circle distance flown from the airport of departure to the waypoint location. From the speed, the progressive distance and the departure time, an event-time can be allocated to each position.
.  Methodology to derive maximum flight level and ground speed profiles for a common aircraft type
For each common aircraft type, a maximum flight level and ground speed profile was
created as shown in Figure 19.

First, for a particular aircraft type, each flight was selected from ETMS data and the
following information was extracted:
Aircraft type (Traffic table).
Traffic ID (Traffic and Flight tables, joined field).

 

Flight total distance (Traffic table). Highest flight level (Flight table). Fastest ground speed (Flight table).

Then the information was treated such as all flights were grouped into flight distance categories of 50 nm. For each category an average maximum flight level, an average maximum ground speed and the number of flights belonging to the category were calculated (Table 35). The reporting of these data to a graph gives Figure 19. The trendline for the maximum flight and the ground speed was then drawn on the graph. It can be noticed that on short distances aircraft fly at a lower level than the optimum cruise flight level. For each aircraft there is a minimum distance threshold above which, the aircraft will fly at an optimum cruise flight level and speed. Below this threshold the cruise flight level and speed are a function of the flight distance.
Table 35: Table AIRCRAFT_MAX_FL_GS_2.

Col #  Column Name  Data Type  Data Description 
1  AIRCRAFT  VARCHAR2(4)  Aircraft type 
2  FLIGHT_DIST  NUMBER  Distance flown in nm 
3  MAX_FLIGHT_LEV  NUMBER  Maximum flight level reached in hundred of feet 
4  MAX_GROUND_SPEED  NUMBER  Maximum ground speed reached in knots 
6  COUNT_OF_FLIGHTS  NUMBER  Number of flights using this type of aircraft 

Figure 19: Representation of the maximum flight level and ground speed for all flights travelled on a B733.

.  Methodology to derive the flight level and ground speed for a common aircraft type when departing
For each common aircraft type, the flight level and ground speed profile was created for
departure as shown in Figure 20.

First, for a particular aircraft type, each flight was selected from ETMS data and the
following information was extracted:
Aircraft type (Traffic table).
Flight distance (Traffic table).
Traffic ID (Traffic and Flight tables, joined field).
Progressive distance (Flight table).
Flight level (Flight table).
Ground speed (Flight table).

Then the information was treated such as all flights were grouped into flight distance
categories of 10 nm. For each category an average flight level, an average ground speed
and the number of flights belonging to the category were calculated (Table 36). Separate
graphs were created for the different flight ranges (e.g. 0 to 200 nm, 200 to 500 nm, 500
to 1000 nm, 1000 plus nm) as shown in Figure 20, Figure 21, Figure 22 and Figure 23.
The assumption is made that for an aircraft type the profile for a short flight might be
different than that for a long flight. The trendline for the flight level and the ground speed is
then drawn on the graph.

Table 36: Table AIRCRAFT_DEP_PROFILE.

Col #  Column Name  Data Type  Data Description 
1  AIRCRAFT  VARCHAR2(15)  Aircraft type 
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AERO2K Flight Movement Inventory Project Report(31)